Jump to content
SAU Community

Recommended Posts

  • Replies 304
  • Created
  • Last Reply

Top Posters In This Topic

Thats typical Japanese bidding..drives me insane. Bloody kamikaze ninja numbnuts thinking if they wait until last 10 secs they'll get it.

I just chuck my max bid in from the get an be done with it.

What are you going to use to run it ??

232,000yen. Didn't wanna spend anymore then 230k to be honest but like u said I hardly see them on there. This one was the best condition one I've seen on there.

I think you got a good score mate. yeah the bloody time extensions on yahoo auctions shits me. I've been buying off yahoo for over 10 years and lost many nights of sleep back in the early 2000s when auctions would re-extend for hours and hours. ending time would be say 8pm and they'd bloody go until 2am with tiny little bid increases every time extra time was about to finish. drove me insane.

When I was staying in Japan early this year my mate mentioned you can actually use a site to bid at the last 0.001 of a second to win the auction. Found that out after I lost the bid on a GT500 RRR block which went for around 5,500 :(

When I was staying in Japan early this year my mate mentioned you can actually use a site to bid at the last 0.001 of a second to win the auction. Found that out after I lost the bid on a GT500 RRR block which went for around 5,500 :(

Waste of time and doesnt always work.

Just work out max you want to pay and throw it in at the start.

Watch it and if it goes past your bid and you want to pay more then throw more bids on.

10 years living in Jappa another 8 on top of that going there on travel business and visa hopping, I learnt a long long time ago not to waste time or energy on dumb stuff the Japanese do.

If you do you will be banging your head against a wall for a long long time.

The Motec 800 will run the V-cam no problems.

Also Midori Seibi have been doing setups with a custom Power Fc that they reset.

Screw the GTR's go a big single..

Autoselect Yellow Shark with V-cam

yellowShark.jpg

Big single would be to laggy on the 26 for now, and means my ARC twin entry cooler would be useless :(

Just wanna get the thing running already. I'll be going either Tomei 2.8 or Brian Crower 2.9 later on.

Now to save some funds again for a front diff and a whole heap of Nissan parts.

Big single would be to laggy on the 26 for now, and means my ARC twin entry cooler would be useless :(

that was just my point mate. response from the -5s is the key for the track. note kaido_RR build, he's done alot of sensible work. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...