Jump to content
SAU Community

Recommended Posts

yup. :D heard it from a friend who is unfortunately a big regular at Regency. Not sure how he found out but he has no reason to make it up..

I'm too scared to want to find out of its true or not with the tools at Regency..

I havent got any stat decs unfortuneately.

But, it isnt going to stop me. I have had legal advice that it would be accecptable to use cases without individual names, state that the names and contact details would be available if required, but are not being published for confidentiallity reasons.

Hopefully, if push comes to shove, anybody who has given me details will be ok with putting in a statement if required - it is probably best to keep names witheld for the time being anyway - enough people get harrassed as it is without making life more difficult unnecessarily.

im thinking of actually selling my car because of all of this. especially this new (apparent) rule of 2 defects in a month = big ****off fine.

steve, so what are your plans with the whole regency thing. i dont feel comfortable having my details readily available but if upon urgent request then yea.. but my experience isnt as severe as other people's on here.

what im not happy about is that as soon as my car gets off its defect, i can leave regency and get pulled over and defected again even thou my car just would of gone thru a full roadworthy test. This is exactly what steve is emphasising that you are guilty until proven innicent. However crims that kill people are innocent untill proven guilty. So whats to say people that enjoy modified cars are worse then murders??

It makes me SICK!

If this thing about getting two defects = fine is 100%, its eve worse.

If you take the example of your chassis rail, you could have left regency the last time, got defected as you left the drive, then fined as it was your second, and because the chassis rail wasnt noticed the first time - the defect would have applied, if they had noticed it. But the regency inspector wouldnt have any liability.

food for thought.

This is a very interesting thread, I will get around reading all replies (when I get the time). Yer, my experience at Regency was one of the most pathetic jokes imaginable.

I imported my 33, got it complianced in Qld and then trucked over. As soon as I got it, gave it a quick wash then off to the 'shit hole'. I was hoping to be in and out in about 2hrs max.

1st stage was fine, then off 2 inspection. I get greeted by the rudest f**wit I have ever met in my life, off he goes with his MagLite torch.

- "That battery is a standard battery. Batteries in the boot have to be fully sealed"

- "That spare wheel doesn't meet national standard"

Sorry all, I'm yet to finish...

I asked what was wrong with the 'still brand new' space saver. "It has to be painted yellow with a 50kph limit sticker on it"

The brake pads were replaced but the discs werent machined (didnt need it). The pads had done a total 10Ks so they hadnt worn in completely. "Your pads are only touching 25% of the disc" - They havent worn in wanker!!! Off to the break tester, passed with flying coulors.

So he hands me a slip on the 2 pissy items that I need to fix before it can get passed. I went off to get a new battery and then rang my compliancer in Qld. He went bunter, not at me but at Regency. He said "Terry, I have done EVERYTHING to the book!". He then paused and said "Hang on Terry, there is nothing in the book that states that you have to have a spare wheel at all" Excellent! I then approach the Ape with this info. He looks in his big book and says "Oh..OK" So, I have my 33 parked in the car park and my pulsar parked next to it. We both approach my 33 and he checks the battery - TICK OK. I then open the boot of my pulsar, remove the spare wheel from my 33 and put it in the boot of my pulsar - TICK OK. This is F***ing unbelievable! The Ape then goes "Hang on, your owners manual prolly has instructions on how to change the spare wheel" (Who gives a F***?) He flips thru the manual "Yep, here it is" I ask him what I should do about it - the wanker shrugs his shoulders. I then get the book, rip the F***ing page out - TICK OK...My 33 is now passed (5 F***ing hours later)

You can imagine how much of a dmpner this put on my day, not to mention the $800 buck it cost to register and pay stamp duty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...