Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just wanted to know,

SRI Carbon Fibre Cold Airbox - Nissan Skyline GTS-T/GTT

Is the part above legal and will it pass a defect inspection, i've spoken to a friend and he claims it should,

But the damn mechanic said No, i think he's just being a *&^!!,

Like honestly what if we can't get the original part, what do we do then.

My father in law threw mine out, shouldn't of left it in his shed.

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/
Share on other sites

Yeah I agree, thats not really an airbox, just a heat shield, and being shiny carbon fibre doesnt look stock either, Just ring a few jap wreakers.

Someone will have one, and you wont need the snorkle to pass, just the airbox

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4746417
Share on other sites

the last cop that pulled me over for a "random" breath test and look under the hood said as long as the pod is fully enclosed its not a defect. i only have some shitty ally cover i made over mine and i didn't get done. as for EPA i'd say you would need the stocko air box, i have mine in the shed :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4748983
Share on other sites

Thanks Guys,

To avoid having to repeat the entire process i'm opting for a factory box,

Unlucky me, the same cop chased me down as i took my son to Macdonalds, out of nowhere he did a starsky and hutch and pulled me over again like i was some sort of killa,

Geez, some just need some sex in their life.

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4753553
Share on other sites

I've got that airbox. It's hard as shit to install if you don't cut the bottom out of that back circle... It makes the job 3 minutes instead of 3 hours...

Pod filters are an interesting piece of law actually. Has ANYONE (cop, engineer, mechanic etc) EVER showed you a piece of paper saying the pod filters need to be covered? I've never seen one, and my engineer (Morry Akbarian, first engineer on the engineers list) says there is no such law.

WHY does it have to be enclosed? What do you have to enclose the pod from? What if it's outside the engine bay?

I would love to see some paperwork on this...

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4754387
Share on other sites

I would also like answers to those questions Doof. Have only ever been told by the law that is has to be, never any paperwork or acutual reason why. I guess from a performence point of view it makes sense to avoid some heat soak.

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4754952
Share on other sites

I've asked different police, never the same answer. One said it was a fire hazard, that a backfire could set it alight... I went on to remind him that true backfires are only from carby engines, not direct injection, and that that would only apply to oiled foam filters... This is after making sure that he wasn't talking about a backfire from the exhaust, which would be rediculous...

Another said it was a sound issue. Kind of a dumb thing to talk about when a guy has the plates DRD-00F... I questioned him as to how it would ever exceed 90dbs, and that induction noise is on every car to some aspect, has no db rating on it and therefore does not fall under the undue/excess noise laws.

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4754983
Share on other sites

Anything other than a stock airbox is a defect, sealed or unsealed or covered or not

Engineers will only approve of aftermarket airfilters if it is enclosed, i.e. if the pod is enclosed in the corner and also engineered, it will pass.

Most of the time a black enclosure will deter most cops, but that is still regarded as defective.

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4771620
Share on other sites

doof .. I'll give ya $20 to take your airbox off and give me precise measurements so I can make my own :D

ive made up a perspex version for a sealed off cai...pm me and ill send you photo's...i can make you a stencil for a few $$

Link to comment
https://www.sau.com.au/forums/topic/281707-just-jap-airbox/#findComment-4782213
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
×
×
  • Create New...