Jump to content
SAU Community

My Skyline Sounds Like A Wrx

3LGODZILA

By 3LGODZILA,
in Engines & Forced Induction

 Share

Recommended Posts

3LGODZILA Proficient

3LGODZILA

Posted
Posted

ive just blocked off my stock bov, NOT for the hektik flutterz yo but so i can use the gasket to trace out an adapter plate to mount a bov on my intercooler piping when i put that in.

so im gna be driving the car round like this for a few days, is it normal to get a rough idle with the bov blocked? and is it normal for my car to sound like a rex and feel really rough until about 2.5-3k rpm?

cheers!

Link to comment
https://www.sau.com.au/forums/topic/281813-my-skyline-sounds-like-a-wrx/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

You blocked off the return pipe from the BOV back to the intake right?

And as if it's not for hektik flutterz. You could just remove the gasket, trace it, and put it back on. But you have chosen to drive it around for a 'few days' like this. I'm calling you out as a ricer!

3LGODZILA Proficient

3LGODZILA

Posted
  • Author
Posted

do u mean that smallish hose from the top of the bov to the side of the plenum? coz no i havnt touched that, all ive done is put a solid gasket between the bov and mount.

damn u cought me out ! lol i hate myself for saying this but it sounds awsome, its only for a few days but, i swear!

zebra Grand Master

zebra

Posted
Posted
do u mean that smallish hose from the top of the bov to the side of the plenum? coz no i havnt touched that, all ive done is put a solid gasket between the bov and mount.

Thats part of your problem your problem, but he is talking about the Bov re-circ hose that goes down to the intake pipe.

The Dan Grand Master

The Dan

Posted
Posted
i blocked off that top hose didnt really do much, the other hose was in a too tight position to block off. its onli gna be like this for a day so shud be alright

No, it'll foul the spark plugs.

There are two hoses. One large one (approx 1 inch diameter) that goes back in front of the turbo, and the vacuum hose that went to the top of the valve. You need to block both

3LGODZILA Proficient

3LGODZILA

Posted
  • Author
Posted

thanks for the heads up :) i just ended up tracing the original gasket onto some cardboard on putting it back in, less hassles

also noticed a coilpack plug was disconected but it may have happened after wen i was fiddling round with the bov. the car did sound tuff hahaah but definatly didnt sound normal

, thanks guys

Krishy Grand Master

Krishy

Posted
Posted

i am running a blocked off stock BOV and never had a problem at all.....al the hoses are still connected and in place as they were before.....all i did was put a metal plate in between the BOV and the mount.....flutters nicely and no problems.....mind you dont get any flutter when it hits 12psi only on low boost it will flutter

payback21 Community Regular

payback21

Posted
Posted
um.... why would you want to move the bov? the stock bov is in the ideal location. nice and close to the throttle body.

Yer i would of thought that. Using the stock posstion is good. You will need the plum back pipe from the bov to the intake in front of the turbo other wise yes it will run like a dog.

Ive tried this trick once before on my old RB20 and it didnt like it at all. Hooked the bov back up with plum back pipe, all good again.

I would stay with the origanal bov or do a search on ebay for a aftermarket one with plumback support.

kurosx Apprentice

kurosx

Posted
Posted
You blocked off the return pipe from the BOV back to the intake right?

And as if it's not for hektik flutterz. You could just remove the gasket, trace it, and put it back on. But you have chosen to drive it around for a 'few days' like this. I'm calling you out as a ricer!

bov was the old rice now flutter.. hmm

kurosx Apprentice

kurosx

Posted
Posted
Sigh@flutters, its the most annoying noise on the planet, specialy wene u see a nice skyline or any car realy and the accelorate near u and make that gay noise - fail

no actually it's more embarresing when my bov goes and everyone turns around and looks at u and says rice.

Evil34 Experienced

Evil34

Posted
Posted

You would have solved your problem when you reconnected the coil pack as you car would have been running on 5 cylinders and misfiring.

The WRX sound of a skyline usually points to coilpacks or plugs as it is a misfiring sound.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...