Jump to content
SAU Community

Water Temp


Recommended Posts

Hey guys just wondering should i be worried around 3 months ago i installed a koyo radiator with stock standard radiator cap the temp on my pfc showed 79-80 degrees when warmed up but 3 months ago i installed a ARC radiator cap and the temp never raises past 65 degrees its even lucky to see 65 degrees so im just wondering should i revert to my standard radiator cap? or just leave it? im not loosing any coolant

Cheers

Chi

Link to comment
Share on other sites

did it only go up to 65 degrees from the moment you put it on? or has it only just started staying that low? if it has only justed then it will probably be your thermostat. if it started that the moment you put the new cap on the put the old one back on.

Link to comment
Share on other sites

Aftermarket caps on a stock rad are a very bad idea.

The problem is most aftermarket caps have a much higher point of pressure.

This means if you do actually overheat the cap wont pop off when it should, and what will happen is the radiator header tank which is plastic - will simply blow apart and send bits flying everywhere at a very much higher pressure than was ever intended

I remember this happening when i was in Pete's (bass junky) car, and it put a good 2-3 solid dints into the bonnet which is some rather nasty damage and quite costly to fix for just changing a cap.

Since that day i will never change from a factory rated cap (or replacement) on a radiator that is not full alloy.

Link to comment
Share on other sites

thanks for the reply R31nismoid but the radiator is a KOYO aftermarket one ahh well tonight i put the stock cap back on and max temp was like 65 so im guessing its the thermostat could it be ne thing else? guess its a good time to upgrade to gates radiator hoses + nismo thermostat

Link to comment
Share on other sites

mine sits on 84 at the moment but its leaking coolant via the water pump which will soon be replaced.

I have a fully sick Spac rad cap which has a nipple attached to a hose running down the engine bay and a nifty button to release pressure before opening. Yeah I know you're jealous of it :P

Link to comment
Share on other sites

The r32 gtr i just bought sits on about 79-80 degs just like yours once its warmed up, mine runs a blitz radiator cap and im not to sure but i dont think its the factory radiator is this a good temp it should be running at?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • that is correct to be more precise, this sensor goes to a loom which contains only the flat blade single terminal (to connected to this sensor) and then the connector shown in my first post. This loom is tied up to one of engine hairness
    • This is really sad news to hear and it has taken me a few days to come to grips with the loss of Neil.  Neil was very straight forward and I have always respected his honesty and how he called it how it was.  He was a very knowledgeable man and was always available to provide advice when you needed help to solve a problem because he would have encountered the same issue in the past and could explain how he solved it.  Neil will be missed by many members of the Skyline family.
    • Dropped the car down to my mates shop on the 19th to get it on the dyno. Ran the motor in and dropped the running in oil and filter and filled it up with some engine oil.  Monday arvo I went down and we got a tune in her. Had a fun time trying to get it to hook up on the rollers. We end up having to roll into the throttle, reaching full throttle at around 6k. Made 23psi on gate then tapered off to 20psi up the top and spat out a healthy 700rwhp.  We had a slight voltage issue which was dropping ecu volts to around 11.8v so we called it quits and on Tuesday I went down and ran a couple of new power feeds to the ECU and DBW relays. Have yet to test it as we were trying to get things sent into the ECU from the TCU over CAN. We've now got oil temp, programme switch and gear position. Still working on gearbox speed, but have been told what to do so hopefully that will sort it. Once we've got speed working, we can start setting up the gear shift cuts and do some clutch adaptations in the TCU.  Should have the majority of it setup this week and go over the tune to see how it is now with the new power wire.  Was slack this time, didnt get any full runs as I was watching the TCU data on the laptop. Snapchat-322660241.mp4
    • Not until I googled it, now I remember lol. Seems like it's just to clean it up. But it doesn't stop the leak, I have a leak issue though? Thinking whether I need a new bottle, surely not lol.
×
×
  • Create New...