Jump to content
SAU Community

Recommended Posts

Hi everybody,

A while ago I took out one of my mirrors on a pole I didn't see, and I am chasing the left hand wing mirror cover to replace my damaged one. I don't need the motors, glass or light, just the outer cover. Nissan will not sell me just the outer cover and they want $560 + GST for the entire mirror. Can anyone help?

Thanks very much,

Brendan Diss

yup, i can.

ill have a pair of silver mirrors complete and working in about 2 weeks if you can wait that long? id probably sell you a whole one for $100 + shipping. id love to part it up, but ive done that before and still have bits of an S13 mirror at home from 10 years ago :(

OR, get a pair of mirror covers with indicators from IM. set you back a bit more, but they look really good!

also, i V35 mirrors are the same and will fit!

feel free to PM me if you like.

+1 on finding a wreck.

I may need a passenger side rear lower suspension arm (what the bottom of the damper is bolted to)

post-31842-1249952407_thumb.jpg

I was actually just after the bush, but it comes as an "all-in-one" unit.

*sigh* As you can see from Parts Master at the bottom of the image, it is just another part that is specific to the M35

Any wrecks around?

I have not yet contact Nissan requesting a price (my wallet shudders each and every time!).

Edited by iamhe77

they cant push the bush out?? aftermarket??

i rekon there will be a generic sized one that will fit, or something from a V35/Z33. nissan wouldnt change all that much, it would cost too much to manufacture a small volume for M35s (then again there are a shit load of them around in japan im told)

is this dew to that creaking sound you hear with the m35 while going up driveways etc?

i've also got a bad vibration occasionally on breaking. it doesnt happen all the time so i can cancel out brake rotors

is this dew to that creaking sound you hear with the m35 while going up driveways etc?

i've also got a bad vibration occasionally on breaking. it doesnt happen all the time so i can cancel out brake rotors

Nah, it is because the bolt is seized in the lower shock mount bush (the nut can be taken off, but the bolt will not come out).

I don't think it has anything to do with the creaking, I would put that down to the front shocks.

I had my Nismo suspension (with the exception of LHR damper) installed and the creaks have completely disappeared.

yeah the tein's sometimes creak apparently? i'm not entirely sure. i thought maybe it was a sway bar still waiting on the Gb to happen for them tho..

must try find this shudder, scary when driving on the snowy roads and it does this.

yeah the tein's sometimes creak apparently? i'm not entirely sure. i thought maybe it was a sway bar still waiting on the Gb to happen for them tho..

must try find this shudder, scary when driving on the snowy roads and it does this.

Is it when you are at less than ~15kph? In snow mode??

Mine sometimes did this when reversing, but I have replicated it in the above conditions.

Get a transmission service... with either Nissan's Matic J AND their transmission additive satchel, or another fully synthetic, high quality fluid (such as Redline, Motul etc).

Should clear it up.

Edited by iamhe77

nar its defiantly got something to do with the steering/suspension arms/bushes etc..

in normal driving conditions. but only happens every now and then. can be cold, can be hot can be as soon as i get in the car, can be after a while.

on the topic now on tranny.. transmax z good to put in? and what was in this satchel?

The V35 & 350Z manuals (same auto trans as M35 stagea) say over and over to only use Nissan Matic J fluid. It says other fluids may deteriorate components over time...

I realise nissan aren't going to recommend other brands though...

I recently had my gearbox serviced, and the workshop used the Nissan Matic J because its all they had (not that there's anything wrong with it - I'd say its up there with anything else), but apparently Castrol do a Transmax E which would've been the one to use (according to the workshop). Dont quote me though.

Edited by pixel8r

well i think nissan say use matic j in the getrag for 34 also.. which i have in my 32..

but i was told transmax z was the best oil for the job. does both transfer and manual gearcase..

i just have some at home so was considering using it in the stagea..

I... with either Nissan's Matic J AND their transmission additive satchel ....

does anyone know about this satchel? the nissan dealer i went to told me i was stupid for suggesting that. and that nissan dont do that, it must be some aftermarket thing that a dealer put in for the customer......

does anyone know about this satchel? the nissan dealer i went to told me i was stupid for suggesting that. and that nissan dont do that, it must be some aftermarket thing that a dealer put in for the customer......

Dunno what is in it, but all new auto Nissan's have it put into their transmissions.

Anyone else is not supposed to have it included in a service, it was just that the guys wanted to put it in when they serviced my trans last year.

I would imagine it is a combination of synthetic additives.

Certainly made a difference in mine!

They did tell me that t was from some company in the US and was designed specifically for Nissan for Nissan transmissions.

For some reason, it can be had for $30 if your dealership is friendly towards we "fringe dwellers" with our "underworld-roaming" cars.

out of interest i just looked this up.

http://www.tds.castrol.com.au/pdf%5C9070_T...828_2008_12.pdf

its specifically for japanese built transmissions and the pdf also says it is an alternative to nissan matic j.

The transmax z is probably fine too, but from the sounds of it this one is better? dunno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...