Jump to content
SAU Community

Recommended Posts

Hi There,

Thinking of getting a set of semi slick Azenis tyres for my R33 gts-t.. (255x40x17 rear & 235x45x17 fromt)

Really interested to see if anyone currently use's these tyres on the street (yes, they are street legal)???

I understand they are soft compund and will wear much faster but does anyone know how many K's they got out of them??

Will it make a small or huge difference to handling on street?

Best regards

Rob

Link to comment
https://www.sau.com.au/forums/topic/28316-falken-azenis-rt215-semi-slick-tyres/
Share on other sites

I have a mate with a well sorted s14 with these tyres. He gets about 10,000km of pretty hard driving.

They'll make a massive handling difference too if the rest of your suspension is up to it.

  • 4 weeks later...
I have a mate with a well sorted s14 with these tyres. He gets about 10,000km of pretty hard driving.

They'll make a massive handling difference too if the rest of your suspension is up to it.

:) thx

Does anyone know how much for the tyres?

I want to get a spare set for occasional track day

I have Azenis semi slick 255/40/17 @ rear and keep my FM901 (235/40/17) in front for handling comparision for two weeks now, the rear does not easy to step sideway as what I though before, instead it's quite grippie compare to the FM901 I had before, also in past weeks sydney was in wet most of time and the falken perform extremly well..

just my 0.02

OH..tempe sell them 300 ea fitted and balance inc german valae.

I bought my 32 with a half worn set.

Three months later they were gone.

I guess it depends on your driving, i was not kind to them.

On a plus side they are unbeatable on the road once there was heat in them. The feel and bite was beautiful even on damp surface.

I'm now running TOYO TS-1 and they suck!

  • 2 weeks later...

I agree GTRman1992, true R tyres are a huge step up from road tyres, the Azenis are definately at the bottom of the range for R tyres.

But the serious R tyres are a real pain to live with, noisey, tramlining, v fast wearing, you would have to be very serious to use them all the time. I've used , Bridgestone Re540s, Dunlop D01Js and Bridgestone Re55s, the Re55s are amazing, another level up altogether

but seriously guys im using the Azenis semi slick tyres on my gtr, and ive never had a better tyre then them, once they get warm, there isnt much differnce in the grip compared to all the other tyres mentioned, the only differnce is that they are east to drive with daily, not noisy, and handle very very well, mine dont last long only a couple of months, but thats only casue all 4 wheels spin in most gears once boost kicks in, ad its only about $1240 for the whole set of 4.

for street use i highly recomend them.

but seriously guys im using the Azenis semi slick tyres on my gtr, and ive never had a better tyre then them, once they get warm, there isnt much differnce in the grip compared to all the other tyres mentioned, the only differnce is that they are east to drive with daily, not noisy, and handle very very well, mine dont last long only a couple of months, but thats only casue all 4 wheels spin in most gears once boost kicks in, ad its only about $1240 for the whole set of 4.  

for street use i highly recomend them.

I see...

And I assume by this you have bought and used D01Js, RE540s, and RS55s on the street and for track work? :D

I run RE-540S as everyday tyres. I don't mind the road noise (only bad at 80km/h) and as for wear:

Tyre set 1 (NangKangs): 8000Km

Tyre set 2 (Yoki 539's): 17000Km

Tyre set 3 (RE-540's): So far about 5000K and they still look good, I've also done a track day with them.

I think for the hard core driving most of us do only a set of racing tyres are up to the task. My NangKangs were not worn out as such, the tread blocks were torn out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...