Jump to content
SAU Community

Recommended Posts

Hi There,

Thinking of getting a set of semi slick Azenis tyres for my R33 gts-t.. (255x40x17 rear & 235x45x17 fromt)

Really interested to see if anyone currently use's these tyres on the street (yes, they are street legal)???

I understand they are soft compund and will wear much faster but does anyone know how many K's they got out of them??

Will it make a small or huge difference to handling on street?

Best regards

Rob

Link to comment
https://www.sau.com.au/forums/topic/28316-falken-azenis-rt215-semi-slick-tyres/
Share on other sites

I have a mate with a well sorted s14 with these tyres. He gets about 10,000km of pretty hard driving.

They'll make a massive handling difference too if the rest of your suspension is up to it.

  • 4 weeks later...
I have a mate with a well sorted s14 with these tyres. He gets about 10,000km of pretty hard driving.

They'll make a massive handling difference too if the rest of your suspension is up to it.

:) thx

Does anyone know how much for the tyres?

I want to get a spare set for occasional track day

I have Azenis semi slick 255/40/17 @ rear and keep my FM901 (235/40/17) in front for handling comparision for two weeks now, the rear does not easy to step sideway as what I though before, instead it's quite grippie compare to the FM901 I had before, also in past weeks sydney was in wet most of time and the falken perform extremly well..

just my 0.02

OH..tempe sell them 300 ea fitted and balance inc german valae.

I bought my 32 with a half worn set.

Three months later they were gone.

I guess it depends on your driving, i was not kind to them.

On a plus side they are unbeatable on the road once there was heat in them. The feel and bite was beautiful even on damp surface.

I'm now running TOYO TS-1 and they suck!

  • 2 weeks later...

I agree GTRman1992, true R tyres are a huge step up from road tyres, the Azenis are definately at the bottom of the range for R tyres.

But the serious R tyres are a real pain to live with, noisey, tramlining, v fast wearing, you would have to be very serious to use them all the time. I've used , Bridgestone Re540s, Dunlop D01Js and Bridgestone Re55s, the Re55s are amazing, another level up altogether

but seriously guys im using the Azenis semi slick tyres on my gtr, and ive never had a better tyre then them, once they get warm, there isnt much differnce in the grip compared to all the other tyres mentioned, the only differnce is that they are east to drive with daily, not noisy, and handle very very well, mine dont last long only a couple of months, but thats only casue all 4 wheels spin in most gears once boost kicks in, ad its only about $1240 for the whole set of 4.

for street use i highly recomend them.

but seriously guys im using the Azenis semi slick tyres on my gtr, and ive never had a better tyre then them, once they get warm, there isnt much differnce in the grip compared to all the other tyres mentioned, the only differnce is that they are east to drive with daily, not noisy, and handle very very well, mine dont last long only a couple of months, but thats only casue all 4 wheels spin in most gears once boost kicks in, ad its only about $1240 for the whole set of 4.  

for street use i highly recomend them.

I see...

And I assume by this you have bought and used D01Js, RE540s, and RS55s on the street and for track work? :D

I run RE-540S as everyday tyres. I don't mind the road noise (only bad at 80km/h) and as for wear:

Tyre set 1 (NangKangs): 8000Km

Tyre set 2 (Yoki 539's): 17000Km

Tyre set 3 (RE-540's): So far about 5000K and they still look good, I've also done a track day with them.

I think for the hard core driving most of us do only a set of racing tyres are up to the task. My NangKangs were not worn out as such, the tread blocks were torn out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...