Jump to content
SAU Community

Recommended Posts

OK, the time has come!

I am organising a paintball outing for club members.. this will be a casual punter day with possibly a beer down at the Serpi Tavern afterwards.

Date: Sunday, 25th October 2009

Time: 12:00pm (best to arrive about 11:30am)

Venue: Action Paintball Games WA, Punrak Rd Serpentine

Will require a $50 deposit the week before which covers a basic marker and goggles hire and you get a free 100 balls for depositing early. After that, pricing is as follows:

pkgInsert.jpg

There are also 3 levels of upgraded markers available:

$20 upgrade - BT4 Combat, mechanical marker with an agitating hopper. Better barrel and slightly higher rate of fire compared to the base gun.

$30 upgrade - SmartParts Ion, entry level electro-pneumatic marker. Huge rate of fire compared to the mechanical markers.*

$40 upgrade - SmartParts Shocker, tournament level electro-pneumatic marker. Huge rate of fire and better barrel than the Ion.*

*I highly suggest that if you decide to go for one of the electro markers, that you also get a large paint package because you will chew through the paint rather quickly.

Camo overalls are provided and it's best not to layer up big time underneath because you'll get rather hot in there. Some sturdy shoes that you don't mind getting dirty is also the go :thumbsup:

Attendees:

- bubba

- R Dirty 3

- Mr Keets

- Marco

- Ossie 21

- Pattygtst

Edited by GTS-t VSPEC
Link to comment
https://www.sau.com.au/forums/topic/283354-sauwa-paintball-day/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

$100-150 is a good day out paintballing.

If you're getting a mechanical marker then a SCOUT or TROOPER package is good.

If you're getting an electro then a COMMANDO or TERMINATOR package is the go.

The 2000 round package seems to be a bit much for most people even with electros.

The electros are the most fun and I'll let you all have a fingerbang of my favourite toy too :P

Edited by bubba

Once we have more of a list of people (and closer to the date) I will start taking desposits. The deposit covers your initial equipment hire, 200 balls and a free 100 balls, any extras (paint packages/upgrade markers) will need to be sorted out on the day once you get there.

P.S. I'll need a mod to add people to the list!

Edited by bubba
Hmm....should I really spend my birthday being shot in the nuts (probably) all afternoon??

Survey says....yes

Absolutely!

Mary spent her birthday standing on the side of the field getting shot at.. at least you'll be able to shoot back!

  • 4 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...