Jump to content
SAU Community

Recommended Posts

Like I said I'm looking for something thats going to cover me for the max power of the 2860-5's, will they do the job? I just don't want them to anywhere close to maxing out. As asked before what is everyone with sard 700's using? the single hole version???

Nothing wrong with the single hole Sard (Denso) injectors as their spray pattern is really good. I use 700cc ones in my R33 GTR equipped with HKS GT-SS turbos. It makes 330kw at 1.3 bar boost, injectors are at around 65 - 70% duty cycle.

My R32 makes 560kw at wheels with the 1000cc single hole injectors at around 70% duty also. I was running 660cc injectors and made 450kw at wheels on 99%. So 600 - 700cc will definitely be fine for you.

I'm selling the 660cc ones at the moment for a good price and will fit your application well - no modifications.

z32 afms are not better then nismo ones, nismo ones basically have z32 internal, in a standard diameter pipe,

advantages with nismos , direct bolt on everything fits,

disadvantages with z32, needs new plugs and different piping, but be able to stretch exiting piping to fit

id rather get nismo afm as the will flow bout the same

z32 afms are not better then nismo ones, nismo ones basically have z32 internal, in a standard diameter pipe,

advantages with nismos , direct bolt on everything fits,

disadvantages with z32, needs new plugs and different piping, but be able to stretch exiting piping to fit

id rather get nismo afm as the will flow bout the same

80mm is def less restriction than 65mm.

They aren't just Z32 internals in a smaller housing because if that was the case, it'd max out way too early because the air has to travel faster through the smaller diameter. I reckon a Z32 sensor and circuit in a RB26 AFM housing would max out at about 180rwkw each.

Nismo's are def fine and if he said he had a standard airbox, that'd def be the go but because he has pods, it's cheaper and slightly less restriction than nismos and u get a set of brand new filters with the money saved.

Yeh that's how much until they max out. That PROVES that nismo have different internals to Z32 because Z32 internals in an RB26 housing would max out far less. I didn't say nismo afm's max out at 180rwkw each, i said if z32 internals were put in an RB26 housing, it'd max out at about 180. Read what i wrote again.

Both Nismo and Z32 AFM's can read very similar max flow but the nismos are more of a restriction as they are smaller. It's only marginal i know but if it's cheaper then every little it less restriction helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...