Jump to content
SAU Community

Recommended Posts

  • Replies 716
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Id assume the stock girdle strengthens to front to back flex, and this would strengthen the side flex

but I'dsuggest to speak with platinum racing for more details on it, im aware they have 2 products 1 is the brace (purple) the other is a brace and awd conversion (blue)

Sump rail and girdle are milled for exact height, the edges of the girdle are machined at an exact angle on a mill, 32 holes are drilled and tapped on the sump rail and girdle for it to bolt onto

Yeah but there is a good chance only 1 in 50 people will actually understand the details, which i have skipped some detail (i can add all the maths with all working out in as well if you like, would be a very long post :P )

Oh and I've ground 29 thou off so far, re cc'd it and its now at 64cc's which would make it 8.67:1CR (before with the 69.6 would have been 8.06:1CR)

And Fatz you think Skylines are high maintenance wait till the little one pokes it's head out omg they eat any spare time whole.

I have an 11 week old and between work, house and him I am flat out and f**ked if I could tell you where all the time actually goes hehe but when they look, smile and laugh at you it's all worth it.

Well i took another 15 thou off, im at 62.1cc's

ok the comp ratio maths

SV

bore x stroke

86.5 x 86.5 / 4 = 1870.5625

x 3.142 x 85 = 499,571.13688

/ 1000 = 499.57113 (SV)

Engine cc's

4.99.57113 x 6 = 2,997.42678cc's

/ 1000 = 2.99743 litre

CV

Head gasket

88 x 88 / 4 = 1936

x 3.142 x 1.2 = 7299.4944

/ 1000 = 7.29949

Deck to top ring

86.5 x 86.5 / 4 = 1870.5625

x 3.142 x 6 = 35,263.84425

/ 1000 = 35.26384

85.65 x 85.65 / 4 = 1833.98063

x 3.142 x 6 = 34,574.20284

/ 1000 = 34.5742

35.26384 - 34.5742 = 0.68964

Piston dome volume

85.65 x 85.65 / 4 = 1833.98063

x 3.142 x 1.397 = 8,050.02689

/ 1000 = 8.05003

Volume around dome measures 1.8cc's

8.05003 - 1.8 = 6.25

piston above deck height

85.65 x 85.65 / 4 = 1833.98063

x 3.142 x 0.1016 = 585.4565

/ 1000 = 0.58546

7.29949 + 0.68964 - 6.25 - 0.58546 = 1.15367

+ Head cc's

69.6 + 1.15367 = 70.75367

+ 499.57113 = 570.3248

/ 70.75367 = 8.06 :1

Also did

64cc's = 8.67:1

62 = 8.91:1

60 = 9.17:1

61 = 9.04:1

61.5 = 8.97:1

61.3 = 8.99:1

61.2 = 9.01:1

So that how i worked out it needed between 61.2 and 61.3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...