Jump to content
SAU Community

Recommended Posts

I have a current problem with my right hand be partly paralized ie very minimal movement of my fingers and wrist. The doctor said I must have slept on it and damaged the nerves. I should have told him I race a high-lateral-g race car. My physio chicky has other ideas after viewing my vids. So I thought maybe a hans devise will restrict my head movements as my necks is always sore after a full day going roundies and this is where the nerves travel from.

My currect Bell Vortex Helmet doesn't have hans posts and here I'm thinking I'm going to get reamed hard up the tucker shoot,,,getting some pro to install them or worse having to buy a new helmet,,,I e-mailed Revolution Racegear and here's what I received in reply.

hANSaNCHORiNSTALL.pdf

Seems you can actually do it yourself!!!. Now I have no idea if this is legal,,,but I'll be doing it anyway.

Just thought I would share this info with you all.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/284285-hans-device-posts/
Share on other sites

As far as I am aware, if the helmet is compatible with the HANS system ie, the manufacturer makes the same model with the holes already in place, then for anything up to FIA level events it is legal to retrofit the posts by drilling as shown.

Hey Neily - I think a HANS is a great investment but as Benny said it's probably not going to help with your movement issue. They are pretty much designed to stop your head whipping forward in a crash and not restrict your movement otherwise. Though some people do complain about it being restrictive I've never found it to be.

I think you'd be better off trying a neck collar like this first http://www.soloracer.com/pyrocollar.html

Probably more suitable for support and restricting movement and about a tenth of the price of the HANS!

And btw NO chance we'll be letting you drill holes in your helmet for posts sunshine :rolleyes:

I use one of these. Seems to work well and saves my neck from whipping around. I actually got a faster lap time when I didnt have to concentrate on keeping head upright.

It fits reasonably tight between my helmet and my shoulders. So my head movement side to side is very well damped. Fairly comfortable actually. I can still look side to side, but can let a load off and allow the helmet to sit on it. A lighter helmet might have helped but I cant afford a carbon one.

They are only about $110

00163A_lge(1).jpg

http://rallynuts.com/motorsport/SPARCO_Nec...k_Brace_565.asp

Edited by Tektrader69

ive seen one installed with a cordless drill......it worked but just seemed wrong when they were doing it.

I have a current problem with my right hand be partly paralized ie very minimal movement of my fingers and wrist. The doctor said I must have slept on it and damaged the nerves. I should have told him I race a high-lateral-g race car. My physio chicky has other ideas after viewing my vids. So I thought maybe a hans devise will restrict my head movements as my necks is always sore after a full day going roundies and this is where the nerves travel from.

My currect Bell Vortex Helmet doesn't have hans posts and here I'm thinking I'm going to get reamed hard up the tucker shoot,,,getting some pro to install them or worse having to buy a new helmet,,,I e-mailed Revolution Racegear and here's what I received in reply.

hANSaNCHORiNSTALL.pdf

Seems you can actually do it yourself!!!. Now I have no idea if this is legal,,,but I'll be doing it anyway.

Just thought I would share this info with you all.

Neil.

The Hans device should helps a little if you have mil to mod cervical spondylosis.

Having little motor function sounds a bit more serious than moderate cervical spondylosis.

Have you had any CT scan or MRI scan?

I would recommend a CT guided cortisone injection, Glucosamine and use as much neck protection as possible if you wish to continue motorsport;

-good helmet

-Leatte brace/hans device

-race seat with neck support

-window net

Edited by 9krpm

Its a bit of a grey area really, ive been told drilling into a helmet would void it. Yet as you say HANS say you can do it yourself.

Interestingly enough when I got mine from BSMSport I said can you fit it and they said clearly NO! but when i said my helmet already had the holes from the factory they said oh yeh easy.

If you did go this way I would strongly suggest a sliding tether and probably quick release posts. I think I am going to get quick release since I am in and out of the car often and its a pain in the ass trying to take it all off in the cabin.

The Hans device should helps a little if you have mil to mod cervical spondylosis.

Having little motor function sounds a bit more serious than moderate cervical spondylosis.

Have you had any CT scan or MRI scan?

I would recommend a CT guided cortisone injection, Glucosamine and use as much neck protection as possible if you wish to continue motorsport;

-good helmet

-Leatte brace/hans device

-race seat with neck support

-window net

You can get this sort of dysfunction with mild or non-existent spondylosis as functional changes account for the vast majority of symptoms. However, the likelihood of some spondylosis/degenerative change/osteoarthritic change/wear and tear is higher as we get older. Even with degenerative changes most symptoms start suddenly which tells you something else has changed more recently which triggers the symptoms.

Issues with the hand could be anything from elbow/wrist/hand issue right through to thoracic outlet syndrome to spinal nerve irritation.

Plain x-ray is the minimum.

Glucosamine has very little evidence for helping necks, although there is little harm in using it for helping articular cartilage generally (particularly knees).

I would be having a really good look at joint movement in the lower neck and improving this area (chiro, physio etc) and secondly the thoracic outlet, then the carpal tunnel, then wrist/elbow muscles. There is no chance anyone would be sticking cortisone in me until other conservative treatment was exhausted.

Geeezz I did not realise there is someone on here who takes free medical advice with more than a grain of salt.

Statistically 90% of the typical cases will resolves in 6-9 weeks anyway. Neil symptoms sound more serious than typical.

Lets discuss anyway....

You can get this sort of dysfunction with mild or non-existent spondylosis as functional changes account for the vast majority of symptoms.

True, however common things happen commonly.

From the very brief history and lack of any traumatic injury place spondylosis highest on the list of differential diagnoses.

Other causes are A-Z.

However, the likelihood of some spondylosis/degenerative change/osteoarthritic change/wear and tear is higher as we get older.

70+ % on XR for over 40 year old

Even with degenerative changes most symptoms start suddenly which tells you something else has changed more recently which triggers the symptoms.

Yes, common cause is that he slept wrong (or slept with it as giant suggested) but doesn't quite exclude A-Z.

Issues with the hand could be anything from elbow/wrist/hand issue right through to thoracic outlet syndrome to spinal nerve irritation.

The chance of a lesion involving all 3 (radial, median and ulnar) nerves somewhere in the forarm or the nerves around the arm (without any effect on the bicep or triceps) causing partial paralysis of the hand are remote. Brachial plexus lesion is possible but often gradual and almost all of my TOS diagnosese revolved with appropriate cervical management.

Most likely diagnosis is multilevel cervical spondylosis with osteophytes especially around C6/7 to T1 with impingement of C7, C8 and possibly T1 nerve roots.

This still doesnt change the proability of A-Z lol

Plain x-ray is the minimum.

70+% of people over 40 wil have cervical spondylosis

Cervical Xray has poor sensitivity/specificity.

It's a waste of time and money in my trade and in this case.

I would advise the patient to save money, wait for a few more week and if he/she doesnt get better then get an MRI scan...if there isn't any red flag on further history or examination

Glucosamine has very little evidence for helping necks, although there is little harm in using it for helping articular cartilage generally (particularly knees).

That's because of poor study techniques not because the medication doesn't work for those synovial joints.

I would be having a really good look at joint movement in the lower neck and improving this area (chiro, physio etc) and secondly the thoracic outlet, then the carpal tunnel, then wrist/elbow muscles. There is no chance anyone would be sticking cortisone in me until other conservative treatment was exhausted.

That is true but not everyone race a cool car like Neil and still like to race even with this amount of problem.

In all seriousness, I agree with you invasive treatment is the last resort for some diagnosis but is the first line for some diagnosis according to the current literature (and my experience).

My advices for long term prevention still stand.

Remember this diagnosis is only from an incomplete history. Obviously the working diagnoses will change as one get more information from examination and investigations....it's like playing Texas Holem lol...just one is more fun than the other :D

Bloody hell boy's I didn't expect all the medical stuff. Thank you very very much indeed.

I'm off to see my doctor again on Wednesday and to the hospital as they are going to make me a splint and as usual physio everyday.One of my problems is I'm over working every other muscle in my body to compensate which has made me sore as shit,,,tired,,,irratable,,,oh and grumpy.

I think I'll print this out and take it with me.

Oh I didn't mention I'm racing again in 4 weeks,,,someone better fix me fast!!!. Oran Park GP,,,will be the last time I run on it in anger.

Thanks again for the info,,,I didn't expect it.

Neil.

I wasn't trying to take start anything but I do work on these daily and I am certainly advocating conservative care prior to more invasive care.

You are going to find we have 10x more common ground than differences of opinion but what I say stands most of it is factual in science and a little of it is hard won opinion just like yours :P

I like glucosamine just fine just in case you think I am naysayer.

I hope Neil gets some benefit out of this as a diversity of opinion (and lets face it you are saying potato and I am saying potaato) should help him get the best outcome and a speedy recovery.

Bloody hell boy's I didn't expect all the medical stuff. Thank you very very much indeed.

Sorry Neil, it was meant to be short and simple but some how it became a medical blurb :)

Your GP won't be able to send you for an MRI unless he has some good connection, only specialist can refer for MRI scan.

The guideline will dictate that XR is the first line of investigation in your case and then if xr shows cervical spondylosis then MRI scan.

That is because these guideline predate the abundance of MRI machines. Nowaday, MRI machines are everywhere and often with empty lists. So you can get them if your GP has the right connection.

The evidence in the literature is that 70+% of people over 40 will have cervical spondylosis in XR, so 70% of people will waste their time and money with the XR. XR is around $100 and MRI scan can be done for $170-800+ (if you know where to go).

You can not and should not get a cortisone infiltration (neck) until you have a MRI scan.

The infiltration is "CAT machine assisted"...ie performed by a radiologist with the help of a CAT machine.

You will get more benefit from an experienced radiologist.

I wasn't trying to take start anything but I do work on these daily and I am certainly advocating conservative care prior to more invasive care.

You are going to find we have 10x more common ground than differences of opinion but what I say stands most of it is factual in science and a little of it is hard won opinion just like yours :P

It's all good mate. I know where you are coming from.

I can't say I treat this daily but I see this 5 days per week :)

I never treat any of them, I only assist them in making the right decision for their medical issue.

I am in QLD so I can't offer any help with your issue Neil.

I do hope that I am wrong and you are in the 90% of typical cases that do get better though.

If you have any query, please feel free to shoot me a pm.

Good luck Neil

Edited by 9krpm

Might be an image somewhere of Peter Saunderson's Radical, a handy steerer.....probably Sports 1300 Qld newsletter, he has a support structure off the ROPS he's been using for 5 odd years to assist with lateral G which might give some ideas.....not sure I'd want to have a bingle with it though.

Best practice I've seen was the Audi LMP (I think), with a removeable composite support up the cockpit center line a la open wheel norms from a few years ago - Mulsannes corner might be fruitful in that pursuit.

Hope it's not spondylosis, do find the affliction helpful for spotting dropped money though!

Well I got really lucky today and got this brace made and thanks to Australia's great health care system I didn't have to pay for it.

post-29-1251283517_thumb.jpg

post-29-1251283396_thumb.jpg

I have an appointment tomorrow with a neurosurgeon,,,one days notice and got someones's cancelled booking. Lucky for me my doctor owns a BMW. Somehow I think I'll get pay back.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...