Jump to content
SAU Community

Jic Silver Coilover Install Fail

endless
 Share

Recommended Posts

endless Proficient

endless

Posted
Posted

Received set of JIC coilovers today i scored off yahoo japan, tried to install them tonight & found out doesn't look like they are to suit a GTS4/GTR/Z32 at all as they were advertised. :)

They are JUST fouling on the metal tab that comes off the suspension arm which the swaybar attaches to..

It's actually so close that i'm even tempted to get the hammer out and give it a mm or 2 of love - but i'm guessing that's enough of a sign they aren't to suit the 32.

Does anyone know what nissan they suit as i now need to sell them!

708hes.jpg

5ako0g.jpg

600x450-2009040800003.jpg

Link to comment
https://www.sau.com.au/forums/topic/285097-jic-silver-coilover-install-fail/
Share on other sites
endless Proficient

endless

Posted
  • Author
Posted (edited)

I did manage to get the fronts in by slightly bending that metal tab out a few mm with an adjustable spanner - all good.

Upon installing the rears i have found the standard bolt that connects the bottom isn't long enough for thread to poke out the other side.

Anyone installed these into a 32 GTR/GTS4 before and had these issues? I'm almost certain they are meant for another nissan unless the GTS4 chassis is slightly different to the GTR..

Edited by endless
Beer Baron Grand Master

Beer Baron

Posted
Posted

nah they look like the right ones. yes GTR and GTS4 are very, very slightly different, but the shocks are basically the same. the bolt issue you have seems to be beause of those little rings they have on the outside of the fork. take along your current bolt to a place like coventry fasteners and ask for a bolt of the same grade and size and thread just 5 or 10mm longer. you should be fine then. they probably came with bolts originally that you didn't get when you purchased them off yahoo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...