Jump to content
SAU Community

Recommended Posts

There is only one....it is Redline Lightweight shockproof :)

Yep, it's blue so you cant miss it (blue bottle, blue liquid aka smurfsblood), effectively a 80w140

Check performancelub.com , its the cheapest place to get it.

my feet r size 13.. no dramas with heel n toe..:D

any ways.. i got the exact same prob as u mate.. but what i m doin, i bought a 2nd hand box, gonna pull that one apart. replace all syncros n bearings n do a swap over.. :)

Edited by ujin
my feet r size 13.. no dramas with heel n toe..:D

any ways.. i got the exact same prob as u mate.. but what i m doin, i bought a 2nd hand box, gonna pull that one apart. replace all syncros n bearings n do a swap over.. :)

Guess it depends on your footwear - I usually rip the workboots off to drive home, 'cause space in the pedal area isn't quite sufficent! I do find my knees tend to hit the steering wheel when heel-toeing.

Good idea to try to make one good 'box out of two, but can you be sure the innards of the second hand one are in good nick?

I can do it in any footwear and my legs are long as fark...but I don't do a proper heel/toe so to speak. Mines more of a regular upright foot but sitting between the brake and accelerator pedals. I just adjust the amount of pressure I exert on the left and right side of the foot so to speak. Takes some practice but IMO it gives more control over the pedals changing the tilt of your foot than turning it on side - plus you don't need anymore room than your regular driving position.

Well heel and toe works great for downshifts but there's not much you can do about noisy synchros on the upshift...just gotta shift ultra slow and deal with it.

I have the same or similar problem. Mine just wont go into 4th. It just grates and I just keep trying to get it in. Very frustrating in a race. It's happened the last 2 race meetings, but not all the time. We use redline shockproof and a short shifter. The throw out race is noisy too. The bush on the end of the shifter wore through so we made another thinking that may of been the problem, but it isnt.

Its only 4th that it does it.

I have the same or similar problem. Mine just wont go into 4th. It just grates and I just keep trying to get it in. Very frustrating in a race. It's happened the last 2 race meetings, but not all the time. We use redline shockproof and a short shifter. The throw out race is noisy too. The bush on the end of the shifter wore through so we made another thinking that may of been the problem, but it isnt.

Its only 4th that it does it.

put a standard shifter in it...both my OS Giken synchro box (new synchro's) and my PPG dogbox crunched into 4th using a short shifter...they are ricey crap.

put a standard shifter in it...both my OS Giken synchro box (new synchro's) and my PPG dogbox crunched into 4th using a short shifter...they are ricey crap.

yes, thats what im thinking. Its been more hassle than its worth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...