Jump to content
SAU Community

Recommended Posts

Hi all,

I'll be honest in saying im trying to make up my 10 posts so i can PM people =/

That said where are the 3 places you avoid ever parking your beast??

I'll go with the obvious ones;

Shopping centres where possible

Movies (too long away from my car I would struggle to enjoy the movie)

Out the front of peoples houses in but not limited to;

Thornlie, Gosnells, Mirrabooka, Koondoola, Balga, Girrawheen, Joondalup etc etc oh.. And of course Northbridge..

=)

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/
Share on other sites

Large shopping centres - Garden city, Caro etc. If i do park there ill hunt around for a good parking spot.. one next to a wall or a curb.

I agree with you on the movies... Alot of car break in happens at the cinema. Although if i watch a movie during the day its not so bad. Its the nights, especially Thursday night where all the gangster wannabe trash hang around.

Northbridge + Freo... drunk ass's that walk around can do alot of dmg. If i do park there, its usually in the CPP.

Im SOR so parking outside houses is still ok here...

Ive had a few car break ins (not in my skyline, but my other car) at curtin uni. Thats a shit of a place to park. not only do u get car break in but.... People there dont give a shit how they park, they will park so dam close to you even tho you have parked so close to the curb on the other side.. they seem to not follow the lines but follow the car instead. That really shits me.

I usually will give them a piece of my mind if we end up leaving at the same time...

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4818236
Share on other sites

Armadale shopping centre before the upgrade.

I returned to my car to see that a woman had parked her trolley against my car to stop it from creeping down the hill that we were parked on as she was starting to offload her food shopping.

I got to my car and she stopped what she was doing and looked at me. I grabbed her trolley and pushed it down the hill, with her in hot pursuit.

The best part was when it got to the bottom of the hill and hit the kerb as it endo'd and spilled all over the road.

I looked at where she had leaned the trolley on the car and saw a minor scratch that wasn't there before.

I got in my car and drove off.

Fair trade in my opinion.

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4818458
Share on other sites

Armadale shopping centre before the upgrade.

I returned to my car to see that a woman had parked her trolley against my car to stop it from creeping down the hill that we were parked on as she was starting to offload her food shopping.

I got to my car and she stopped what she was doing and looked at me. I grabbed her trolley and pushed it down the hill, with her in hot pursuit.

The best part was when it got to the bottom of the hill and hit the kerb as it endo'd and spilled all over the road.

I looked at where she had leaned the trolley on the car and saw a minor scratch that wasn't there before.

I got in my car and drove off.

Fair trade in my opinion.

HAHHAHHHAHA

wtf!! hahahaha

i would of loved to have seen that.. i would of died of laughter hahaha...

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4818504
Share on other sites

Large shopping centres - Garden city, Caro etc. If i do park there ill hunt around for a good parking spot.. one next to a wall or a curb.

I agree with you on the movies... Alot of car break in happens at the cinema. Although if i watch a movie during the day its not so bad. Its the nights, especially Thursday night where all the gangster wannabe trash hang around.

Northbridge + Freo... drunk ass's that walk around can do alot of dmg. If i do park there, its usually in the CPP.

Im SOR so parking outside houses is still ok here...

Ive had a few car break ins (not in my skyline, but my other car) at curtin uni. Thats a shit of a place to park. not only do u get car break in but.... People there dont give a shit how they park, they will park so dam close to you even tho you have parked so close to the curb on the other side.. they seem to not follow the lines but follow the car instead. That really shits me.

I usually will give them a piece of my mind if we end up leaving at the same time...

Agree'd on Curtin, I had some girl drive straight into mine even after trying to correct the angle 2 or 3 times.

I always try to park next to nice cars or curbs and sometimes return only to see an old beat up thing next to mine :thanks:

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4819424
Share on other sites

park next to curbs or in corners...stay away from spaces that TRUCKS CAN PARK IN >: (

perfect example... parked in a complete empty car park at gateways... a big western power truck parked right next to the car... western power truck pulls out and doesn't do a correct turn and the wheel scrapes the end of the car...

not a very nice situation

so pick your spots wisely!!!!

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4819476
Share on other sites

Agree'd on Curtin, I had some girl drive straight into mine even after trying to correct the angle 2 or 3 times.

I always try to park next to nice cars or curbs and sometimes return only to see an old beat up thing next to mine :)

If you have early classes (like 8'oclock ones) then I found the best spaces are in student car park 1. When you go in to the car park from the main entrance, there are a couple of car park spaces on the right that are about 1.5x wider than regular spaces. I always park there if I going to be at Uni for extended periods of time.

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4822797
Share on other sites

Armahole is still dodgy, doesnt matter how many new buildings and trainstations they build

To quote an old saying: You can chrome & polish a turd but at the end of the day it's still a turd!!!!!!!!

Oh and don't take yer pride & joy to Bunnings either, someone didn't like mine (or me) and walked around it with a very sharp implement. I think the roof was the only panel not resprayed

Edited by mosoto
Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4822812
Share on other sites

Armahole is still dodgy, doesnt matter how many new buildings and trainstations they build

Won't argue with that.

There's just no more sideways hill parking so the leaning incident probably won't happen again.

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4822824
Share on other sites

Willagee Shopping center, bunch of fu#heads, was reversing out in the wet, saw a car so i stopped about 1m of the back end hanging out, but the stupid bitc$ driving in her fowlcoon thought she could drive through me, bam, back left of my SOLD Supra dented, she got out and blamed me, it doesnt matter that she was doing 30 odd through this tiny little car park in the wet with little abo's running around, or the fact that she was driving 10cm away from everyones bumper or even the fact that she didnt slow down and let me out, she still told me that i should slow down!! WTF so now im left with damage n she wont pay!!! fu#kn broad minded person

Link to comment
https://www.sau.com.au/forums/topic/287321-where-to-avoid/#findComment-4830629
Share on other sites



  • Similar Content

  • Latest Posts

    • Got the gearbox in and the front drive shafts.
    • Hi There I went through a rabbit hole of reading about Xenon headlights and the ADR regulations for having them installed. As people have been defected by running factory xenon I was researching in ways to make them compliant. Everyone always say needs to be self leveling and have washer installed, which I don't necessarily agree with. For this argument I'm using R34 as reference as I'm more aware on the construction of the headlight compared to the R33 Xenon, which may still be the exact same case.   For the self leveling clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles As you can see the bold text "these manually adjustable devices from driver seats" are fine to use. As Series 1 Xenon model headlights do have a 4 level adjuster on the right near the ignition (however not series 2) then these model are consider compliant in that argument.   For the Self Cleaning aspect of this argument clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles Now i can understand the argument that Xenon will need a washer as they are over 2000 lumens, but I clicked on the 12 at the end of that sentence and it takes me to the end notes which states R34 for headlight lenses are plastic, not sure if PL is mark as I don't currently have my skyline to confirm that marking is there. But could you not technically get a lenses with the PL marking on it and then get away with the argument that you need a washer. I went through a quick read of the adr and might have missed something else that may cause them to be non-complaint.    But wouldn't these technically be complaint headlights   Would love to hear other people input on this and shed some light   Edit In regard to the the washer portion I might be mistaken ADR 45 (which I believe is Regulation NO.45) states 12 cd (candela) I dont understand that portion in regarding to calculating the candela if anyone can shed some light. Otherwise I guess throw in a washer for the headlight and you definitely comply.
    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
×
×
  • Create New...