Jump to content
SAU Community

Recommended Posts

Heaps Of Parts Rb's, Gearbox's,garrett, Tial Heaps of performance parts, r32,s13,180,s14,rb25 engine,sr20,2jz,rx7

-RB25det long motor 80,000ks from C34 stagea good compression in car, custom high capacity sump no manifolds or turbo etc includes loom moddified to suit plug and play r32 and std ecu $1700 or with out loom and computer $1500

-Garrett 3082R .82 3 weeks old one dyno run mint condition $1600

-Tial Wastegate 44mm v band type one dyno run old$500

-Custom steam pipe manifold to suit RB 20/25 has 44mm tial gate flange and t3 footprint heat wraped same as 6 boost good condition $750

-R32 tien basic coilovers with king springs 12kg fornt and 10kg rear also have std spring rates 1 month old$600

-R32 fr and rear whiteline adjustable sway bars like new $450

-Custom rb 25 inlet plenum suits just jap 80 or 90mm tb also has adapter and std tb fits perfect looks trick =] $600

- Rb25 VPW fuel rail kit and 6x siemens deka 650cc injectors includes rb25 injector loom with plugs to suit $600

-buddyclub P1's 17x8 and x9 with good tires $1100

- white r32 GTR bonnet and grill (aluminium) perfect condition $400

- r32 newish genuine dmax front bar $300

- ca18det ecu - $60

- rb20/25 high mount stanless manifold, brand new never fitted - $250

-ca s13 power steering pump $50

- s13 sr20 turbo brakes with decent pads lines knuckles lwr control arms etc - $150

-s13 sr engine x member $100

-ca radiator gc $40

-sr s13 gc comes with thermos $40

-heaps of turbo bends elbows pipes to suit sr and 25 $20 each

-s14 handbrake and cables $30

-s2 rx7 manual gearbox gc $200

-2jz turbos and manifolds probs need rebuild $50

-s14 greddy air diversion panel a couple small marks dints etc still works good $50

-ca18 loom has one interior plug misisng$50

-set of 4 17x8 skid rims $400

-s14 std steering wheel $50

-s14 std mirrors white $100

-s14 airbox $60

-s14 clutch fan recently serviced and fan shroud $50

-s13 blinker and wiper stalks air bag type $30 ea

-2x cannon mufflers $50 ea

-2x used sr clutches one is nismo solid centre other is exedy sports button average condition might need a machine $50 each

-ca18 auto gearbox tailshaft gc $100

-sr20 manual tail shaft yoke $80

-rb25 top half plenum no tb $30

-s13 clutch pedal and man brake pedal assy $200

-4x16inch r33/s14 std rims 2 are pink 2 are black no tires $150

-r32 nismo strut brace $50

-sr20 std fpr $10

-rb20 std fpr $10

-6 rb20 injectors $100

seriously heaps of stuff need anything ask

will post up more as i think of it

PM me =]

Located on gold coast or ipswich

Hey mate, interested in the RB25. Have you got compression results for it? Does it just need exhaust and intake manifolds and turbo? Anything else? Would you be willing to ship it to Vic?

  • 2 weeks later...
Heaps Of Parts Rb's, Gearbox's,garrett, Tial Heaps of performance parts, r32,s13,180,s14,rb25 engine,sr20,2jz,rx7

-RB25det long motor 80,000ks from C34 stagea good compression in car, custom high capacity sump no manifolds or turbo etc includes loom moddified to suit plug and play r32 and std ecu $1700 or with out loom and computer $1500

-Garrett 3082R .82 3 weeks old one dyno run mint condition $1600

-Tial Wastegate 44mm v band type one dyno run old$500

-Custom steam pipe manifold to suit RB 20/25 has 44mm tial gate flange and t3 footprint heat wraped same as 6 boost good condition $750

-R32 tien basic coilovers with king springs 12kg fornt and 10kg rear also have std spring rates 1 month old$600

-R32 fr and rear whiteline adjustable sway bars like new $450

-Custom rb 25 inlet plenum suits just jap 80 or 90mm tb also has adapter and std tb fits perfect looks trick =] $600

- Rb25 VPW fuel rail kit and 6x siemens deka 650cc injectors includes rb25 injector loom with plugs to suit $600

-buddyclub P1's 17x8 and x9 with good tires $1100

- white r32 GTR bonnet and grill (aluminium) perfect condition $400

- r32 newish genuine dmax front bar $300

- ca18det ecu - $60

- rb20/25 high mount stanless manifold, brand new never fitted - $250

-ca s13 power steering pump $50

- s13 sr20 turbo brakes with decent pads lines knuckles lwr control arms etc - $150

-s13 sr engine x member $100

-ca radiator gc $40

-sr s13 gc comes with thermos $40

-heaps of turbo bends elbows pipes to suit sr and 25 $20 each

-s14 handbrake and cables $30

-s2 rx7 manual gearbox gc $200

-2jz turbos and manifolds probs need rebuild $50

-s14 greddy air diversion panel a couple small marks dints etc still works good $50

-ca18 loom has one interior plug misisng$50

-set of 4 17x8 skid rims $400

-s14 std steering wheel $50

-s14 std mirrors white $100

-s14 airbox $60

-s14 clutch fan recently serviced and fan shroud $50

-s13 blinker and wiper stalks air bag type $30 ea

-2x cannon mufflers $50 ea

-2x used sr clutches one is nismo solid centre other is exedy sports button average condition might need a machine $50 each

-ca18 auto gearbox tailshaft gc $100

-sr20 manual tail shaft yoke $80

-rb25 top half plenum no tb $30

-s13 clutch pedal and man brake pedal assy $200

-4x16inch r33/s14 std rims 2 are pink 2 are black no tires $150

-r32 nismo strut brace $50

-sr20 std fpr $10

-rb20 std fpr $10

-6 rb20 injectors $100

seriously heaps of stuff need anything ask

will post up more as i think of it

PM me =]

Located on gold coast or ipswich

- Rb25 VPW fuel rail kit and 6x siemens deka 650cc injectors includes rb25 injector loom with plugs to suit $600

Hey mate, you still got the fuel rail kit, the injectors, the injector looms and plugs? Keen to take these off your hands, will you be able to organise delivery to Perth?

How old are the injectors and the fuel rail? Ever been fitted?

Would you accept $450 inclusive of freight?

bare 25 is SOLD

Hey mate, you still got the fuel rail kit, the injectors, the injector looms and plugs? Keen to take these off your hands, will you be able to organise delivery to Perth?

How old are the injectors and the fuel rail? Ever been fitted?

Would you accept $450 inclusive of freight?

sorry mate not as yet still have other interest at asking price..... injectors rrp for 120 ea and fuel rail was 300 thats over 1000 dollars worth of gear with out the plugs speedflow fittings lines etc been used for 3 weeks

I still want the strut brace but you never replied to my PM!!!

hey mate sorry been so busy still here do u need pics? its got red plates and the bar is silver i will get pics to you tonight

pics of the r32 front bar please

will pm you shortly

hey dude cant pm ..not enough posts, have you got any rb coil packs?

yes have a set of super sparks 300ono used for 3 weeks like new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...