Jump to content
SAU Community

Fane's Accident

fane

By fane,
in Western Australia

 Share

Recommended Posts

fane Mentor

fane

Posted
Posted

I just avoided a huge car accident and in the process smashed in the two left side enkei mags hitting a kurb.

I was driving up the beach road on doddi's beach, following a VL Calais Turbo and looked to my right to look at some putang... and there was a camera on the other side of the road coming towards us and he decide that he wanted to turn right and pulled out infront of the calais. The calais locked it up and i chucked on the skids he fully T boned the camera and I pulled off the breaks and swerved into the other lane between 2 islands and hit the 2nd one smashing my both left enkei's and my front bar a bit. i pulled it back and went straight up the road.

When i went back and made a police statement and stuff both cars were write-offs and the calias went about 10 metres from impact point and the camera went about 30 metres. The old guy in the camera (he was driving very slow) got cut outa the car with the jaws of life and the 2 guys in the vl were ok. I am a bit stirred up and pissed about my enkei's but im ok, im going to go jack up my car now and check all the suspension... i'll post some pics later tonight....

moral of the story look at putang while not following a VL.

im gonna ring the chick i been after for 5 months tonight and tell her everything....

life is too short boys.....dont bitch about the small things.....live making big things....

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/
Share on other sites
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

fane Mentor

fane

Posted
  • Author
Posted

posting pictures in a min, but the back looks repairable, the front is fully bent in but i dont know what they can do these days, they might be able to pull it back but i doubt it. Just went and looked at suspension and shit and it looks ok.

when i was just taking pictures i just found a slight pin strip of white down the door that is so faint that i reckon it can be buffered out really easy. and the rearvision mirror was folded in. with a whis paint mark on that aswell.. and the calais was white so i must have got so close to is that i just actually hit it i'll post the pics of it in about 20 mins....

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597083
Share on other sites
fane Mentor

fane

Posted
  • Author
Posted

well i think i know the guy and he has no money or insurance so i cant be fked with it.... plus the more i get involved the more stress and the more worry and i dont want that... i just want to get away from it and get it back on the road....

at the first stages its looks like the only damage is 2 enkei rims.... and the front bar which was already hammered....(the door will buff out of positive) :)

good news is that all the people involved should be ok, although the old guy had to get cut out with the jaws of life... :)

ummmm....if someone can recognise what the name of my enkei's are when i get the photos up i will be very appreciative as i would like to get a hold of one as i love them....

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597102
Share on other sites
AutoTrust Mentor

AutoTrust

Posted
Posted

Fane, that sucks, glad you're ok, those rims are multiple piece mabe you can order the outer rims only, that would have to be cheaper than entire wheels. your paint looks like it will come up nice with a cut & polish. Good luck with the repairs. :cuss:

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597155
Share on other sites
bully Experienced

bully

Posted
Posted
I think the rim could be fixed fane,as the outer is just steel.

Try someone like Summerfield engineering in Kenwick as he makes steel rims and stuff.

Your stunt driving skills have been tested and you passed.Good work.

Fane nice to hear of your lucky escape

have you told the police how you avaided the accident if so new front bar claim on thier insurances looks good and they should pay for the rim repair its worth finding out

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597158
Share on other sites
fane Mentor

fane

Posted
  • Author
Posted

my insurance will sky rocket if i claim it so im fked if i do.... its not the excess of 400bucks but the $2600 a year instead of $996, might try and absorb it...

yer dean i went back down there about 5 mintus after with the old man and made a statement and everything and they seem quite cool about it...

DR30, i was hoping that would be the case... i actually think that they might be able to pull them back aswell... lets hope.... i'll go up this weekend and drop them around the place and see what they can do...

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597174
Share on other sites
lacitpo Contributor

lacitpo

Posted
Posted

not cool :)

good to see your ok tho..

a magna took out a light pole about 30 mins ago on the freeway. came down onto the entry ramp and the front of the magna was ****ed. didnt look *that* bad - luckily. lamp was on the ground when i went past, ambo and cops were there. think the dude(s) would have been ok - maybe a bit of 'lash

Link to comment
https://www.sau.com.au/forums/topic/29076-fanes-accident/#findComment-597223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...