Jump to content
SAU Community

Recommended Posts

Hey simon what are your thoughts on limiter bashing, my tuner and a fair few people here seem to think it cracks oil pumps and all sorts due to everything getting unbalanced and vibrating, thoughts?

My tuner personally likes just dropping it down to almost 10:1 where the red line is to kill the power and make the engine tend to drop back in revs anyway.

I'm pretty certain that many motors that have died as a result of cracked gears and limiter action were either a) non standard gears b) non standard pumps or c) combo of both and to much clearance.

Stock motors are fine. I've never once cracked an oil pump as a result of limiter in 10 years of drifting. All my motors see plenty of limiter action.

As for tuning it to taper off up top I would never do it. Most engines fall over and start losing power as they near limit anyway so no need to adjust that. If your motor is making peak power right near limit and still climbing then maybe adjust the cam gears a but to bring it back towards the midrange a bit

So that battle went to a re run and who went through?

I'd be interested to know why you didn't get the win off that first battle. To me you pull away out of turn one. Tom Carries less angle then chases you down. But that's with less angle. I would have thought advantage you.

Then your chase lap you emulate his angle and stay the same proximity all

Run. Advantage you.

Or am I missing something?

I see you have dropped the big wing as well. Any reason or just a change?

yeah the general consensus is that i won the first battle and it should never have been rerun...everyone has the same opinion, even tom said i won it haha.. except the judges. when i asked them why they reran it they said that i won my lead lap however on the chase lap they scored it 7-3 in toms favor because i sacrificed angle to maintain proximity... i mean really?!

its stuff like this that makes me wonder why i bother competing

as for the wing.. yeah i got over it. the grip isnt really needed for drifting in fact its more of a backwards step then anything. my car has a lot of mechanical grip as it is. With the wing on and doing 160 into the first corner to enter theres a lot of grip in the rear and it makes it hard to break away.. but once sideways you lose the aero and suddenly you have less grip. makes it feel a tad unpredictable.

yeah the general consensus is that i won the first battle and it should never have been rerun...everyone has the same opinion, even tom said i won it haha.. except the judges. when i asked them why they reran it they said that i won my lead lap however on the chase lap they scored it 7-3 in toms favor because i sacrificed angle to maintain proximity... i mean really?!

its stuff like this that makes me wonder why i bother competing

Whaaat? Maybe for 2 seconds near the end, for the rest of it you were like a ghost of Tom's car! Anyway, top quality driving mate! That's the sort of thing I'm hangin out for in the ADGP at the end of October :D

It's easy to be an arm chair judge but I'm guessing that footage is shot from the judging area making it fair to judge from. There has been quite a few people upset this year from judges calls in the tassy series but where the majority of spectators watch from gives a totally different aspect to what the judges see so they can ony go off what they see. You do seem to get the rough end of the stick with calls thoe. Good driving non the less.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...