Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

They're that bad are they? I've heard good and bad about them, was thinking I'd try them out myself but seeing they're close, ah wells.

yes they are. Should of gone around the corner to Edwardstown custom body reapais or even more south to hounslow crash :ninja:

well your just silly then.

Why pay $30,000 for a parts kit that you can do in Australia for $50.

RIPS are pulling over 10,000 rpm on burn out and 1400HP on a standard RB30 block with standard crank and crank girdle.

Edited by D_Stirls

ugh. gtr purists. im siding with dale. f**k spending $30k on some liners and a bolt on deck when i can jump on the club and find a 30e bottom end for less than $50.

and ive heard of quite a few of the os kits failing at life. id be pretty torn up about $30k going to waste, but i wouldnt give 2 shits about a 50 buck bottom end.

*just had a look at the kaki kit, seems waaaaay too cheap.

makes the perfectly nice car look a little cheapish and nasty / track hack job imo.

and i could 'almost dig it'. the splits a little off. if it was something like this,

Japanese_NISSAN_SkylineR34_GTR_police_car.jpg

itd be rad, and i actually would dig it.

Think I should of called before I went for a drive, went all the way to MC Doyles Crash Repairs and they were closed... as in like they didnt pay their bills and got shut down. Guess I'll have to take my business elsewhere...

that really isnt a bad thing.

Edited by scandyflick

that Kaki* kit is only sleeves and a block deck so no $1500 is not that cheap

Dan its about 450-600 to get an AWD adapter plate for the RB30 but a deck is a stronger better RTA friendly option you keep your original engine number

No pos RB30 bottom ends should be in a GT-R imo

:)

Dont get me wrong, I'm all for twin cam RB30's in VLT's, GTSTs, etc but not a GT-R... C'mon lol

Putting an rb26/30 in a gtr isnt a bad idea, if you use the car for performance or any kind of motorsport

keep the 26 stock tho if you want a streeter that'll hold its value - if I had two gtr's, I'd def put a 26/30 in the 2nd one

-D

Think I should of called before I went for a drive, went all the way to MC Doyles Crash Repairs and they were closed... as in like they didnt pay their bills and got shut down. Guess I'll have to take my business elsewhere...

This is actually a blessing for you. PM me if you want further info but I wouldn't send my worst enemy there...

And I'm a big GTR fan but nothing wrong with a 26/30. Shit, I'd build one would it be not for the legality issues and all. Don't fancy ripping out a motor to visit Regency

This is actually a blessing for you. PM me if you want further info but I wouldn't send my worst enemy there...

And I'm a big GTR fan but nothing wrong with a 26/30. Shit, I'd build one would it be not for the legality issues and all. Don't fancy ripping out a motor to visit Regency

Word

-D

with all this talk of rb30's, im feeling good, just a cam, turbo..and a manual conversion away!

Also, whoever owns a 100 series Landcruiser...you sir or madam, know how to select a good car!

Definatly the best 4x4 ive driven, and the easiest to work on. :)

would it really be noticeable to the untrained eye though? (having a 26/30)

Easily. The RB30 block causes the head to be situated very high compared to the stock 26, pm cubes and ask him about how much clearance he actually has (he reckons its not a lot)... cant run a strut brace with a 26/30 unfortunately

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...