Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

easiest way to bleed nissan clutches is to have 4 hours and plenty of beer spare, or buy a 1pc braided line from master to slave and p1ss the balance block and damper pipe off. Most good workshops will follow the factory service manual and pressure bleed it with a vacuum device :/

Cheers, but its definately not the hydraulic system...

I had a similar issue, didn't crunch gears but was sticky as f**k. Clutch fork had spun on the thrust bearing and the slave was pushing the fork on an angle etc etc, it was really messy. It was all replaced before any serious dramas but frusterated the f**k out of me.

Yeah its weird.

JMW has seen it in person this afternoon, got him a bit stumped too.

Its got to be the pivot or fork.

Congrats! Looks like a beautiful puppy. Please make sure you train and exercise it properly and love it dearly.

Sorry Steve but I'm going to call bullshit on that statement.

I have volunteered at the Lonsdale RSPCA in the boarding section for over 18 months now where we have a minimum of 70 dogs every day and up to 120/130 dogs per day on long weekends. After looking after, walking, playing with, feeding and grooming 1000s of dogs I can tell you that temperament problems have nothing to do with cross breeding.

Dogs are the most loving and loyal creatures (to humans) on the planet. Temperament problems that can occur will usually be due to the humans that come in contact with the dog, its surroundings and everyday life, if the dog has been attacked before, or in some cases mental illness (just like humans have).

As someone who studied genetics I can tell you that 'pure bred' dogs have suffered from generations of in-breeding, usually grandfather & granddaughter mating, and IIRC in some breeds there are less than 50 variances in their genetic code, ie they are closer to extinction than the Panda Bear. I will need to search to provide a reference for that statement though. Cross breeds vary the genetics of the dog and are therefore likely to live longer and suffer less illness. I had all this info on my old C: drive which died so I'll have to search for the books again to elaborate further.

Hence why i lol'd at steves comment.

will definately be a great addition to the family, i always wanted to have a child and dog grow up together

just as i did when i was a kid.

got a quote from ''jetpets'' today, they want $280 to fly him from pt lincoln to adelaide...

yeah, not a bad price, but im not sure if i trust them lol

Hence why i lol'd at steves comment.

will definately be a great addition to the family, i always wanted to have a child and dog grow up together

just as i did when i was a kid.

got a quote from ''jetpets'' today, they want $280 to fly him from pt lincoln to adelaide...

yeah, not a bad price, but im not sure if i trust them lol

My dog is the same as the one your looking at. Same cross etc.

Best dog ever! So loyal, fun, playfull and bulk so scares some people but she's great with people and kids! She's getting a bit old and I don't think there's much left in her :O

when she was young she was very energetic and wanted to sus everything out but that just made it even better to have her around.

Not sure what I'm getting at with this post anymore haha but just saying you won't regret getting that cross bread :banana:

Alot of SA people are going to the Kadina Show and Shine this weekend, so you might not get much of a response. And maybe dont include the meet location, unless you want unwanted visitors, and i dont just mean cops! :P

nar thats cool its all above board nuffin dodgy going on and everyones welcome even a holden or 2 :ermm:

and if we dont like the company iam sure they might get lost from the pack if we try hard enough :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...