Jump to content
SAU Community

Recommended Posts

red 32 on james ruse drive and a silver 4 door 32 on windsor rd

saw a red 32 todaya also. no wing yeh? .. was heading down oldnorthen road at about 6:45am and turned off at Colourwise..

Spotted "DHC" Black R34 , Yesturday arvo in my local area goin down George st Windsor. Wondering WTF he doin round here :). Was in my fully sick 1.8l Corolla auto. So you wouldnt of noticed me

Spotted "DHC"  Black R34 , Yesturday arvo in my local area goin down George st Windsor. Wondering WTF he doin round here :(.  Was in my fully sick 1.8l Corolla auto. So you wouldnt of noticed me

spotted you in richmond at around 1:30-2pm today i flashed my lights just as you turned off

Spotted a silver R32 waving at me as we got out of Dural Carwash this evening. Sorry couldn't wave as was too busy controlling the car!

Also spotted silver R32 GTR (GTR-32X) parked on John Road while I was driving back home.

spotted shonen on george st... :(

i was driving the gunmetal 32 gtr :(

waved at ya

was I turning right onto george st from eddie ave ?? and you were waiting at the lights ???

I did see a gunmetal 32 and yeah the driver put his arm out but I wasnt sure if it was a wave or not...plus I only saw ya just as I was turning so I couldnt do much !

Spotted "DHC"  Black R34 , Yesturday arvo in my local area goin down George st Windsor. Wondering WTF he doin round here :(.  Was in my fully sick 1.8l Corolla auto. So you wouldnt of noticed me

Was going to the bank.....yes im a local too :(

But I drive the van when going short distances like bank and doctors etc.

was I turning right onto george st from eddie ave ?? and you were waiting at the lights ???

I did see a gunmetal 32 and yeah the driver put his arm out but I wasnt sure if it was a wave or not...plus I only saw ya just as I was turning so I couldnt do much !

yea that's it ;0

i was yawning/stretching and then i saw ya so i did sort of a semi wave lol

Sam ???

hahhaah didnt know you were still around !!

hows the car?

Hey Thomas

Im still here mate just dont get to any events now days. Saturday was my first day at an event in over 12 months

Been spending all my time with my son, but after the skid pan day at EC I'v got the itch again

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...