Jump to content
SAU Community

Recommended Posts

lol its okay guys I wasn't in the line that time. Was driving another car.

And yes that turnoff onto Pennant Hills road from Edward Bennett is very boring (takes so long) - prob why I wasn't paying attention on the road :domokun: .

think i spotted stevo's white 32 gtr with impuls on king georges

but a chick was driving??

Couldve been it, i left it at home all yesterday and the keys were there aswel, anyone at home couldve "borrowed" it i spose

well you have an copy going round! lol

also had white plates and was around our area

Id say it was mine - i wasnt at home so i dont know if it was driven - but it probably was borrowed without me being asked first :(

Spotted Liz yesturday arvo (sat) in linfield.

Then at the set of lights at linfield and the pac hwy (near coles) saw a grey 32gtst - got a wave.

then saw a stock 33gtst parked on pac hwy near linfield

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...