Jump to content
SAU Community

Second Hand Tyres - Never Pay For New Tyres Again.


Recommended Posts

Though i would add a little information about this, took me a while of searching to dig up these places.

Just got 255/40/17 90% potenzas re050a runflats for $400 balanced and fitted... same type as my mums new mazda 6

Would cost more than $1000 new and theyre about 10 times better than my old federal 595ss

im never going to pay for new again, scoped out 4 places... here they are... easy searching.

North End tyres

29 a Carrick Drv, Tullamarine, VIC 3043

p: (03) 9330 3145

Secginhand Tyre & Brake Service

2/14A Adrian Rd Campbellfield VIC 3061 - (03) 9357 9970

9357 9970

ENTYRE ENTERPRISES

Cnr Abbotts Rd and England St.

Dandenong South 3164

9706 5443

Northwest tyres

62 Newlands Rd Reservoir VIC 3073 - (03) 9462 2692

Enjoy :D

Edited by V-Spec

I've had my own tyres "go off" before, few burnouts and they simply don't grip like they used too when i used to drag race a fair bit.

hence i stopped burnouts on street tyres, no gain what so ever.

They still had a good 85-80% tread on them too, but became rather dangerous in the wet, i know North End sell that kinda stuff as i've grabbed stuff from there before.

Just because a tyre has tread doesn't mean they are magically better so be very careful

Highly recommend these guys:

Northwest tyres

62 Newlands Rd Reservoir VIC 3073 - (03) 9462 2692

I've been there heaps of times when I was younger and didn't have much money. Good guys and you'll get a good deal on tyres that still have 80%+ tread. Normally around 40-50% of the cost of new ones. Not sure whether I would go there now with the Skyline, i'd rather pay a bit more and be 100%sure of what i'm getting, but if you've got a daily or something, i'd recommend it.

I've had my own tyres "go off" before, few burnouts and they simply don't grip like they used too when i used to drag race a fair bit.

hence i stopped burnouts on street tyres, no gain what so ever.

They still had a good 85-80% tread on them too, but became rather dangerous in the wet, i know North End sell that kinda stuff as i've grabbed stuff from there before.

Just because a tyre has tread doesn't mean they are magically better so be very careful

Agreed. Just put on Michelin PS2 with 90%thread and don't grip anything like original Michelin PS2

Fawkner Wheels and Tyres sell second hand tyres for $70 each incl fitting and balancing. i got 2 215/45/17 goodyears with 60% and 2 225/45/17 Micillans pilotsport.....but there service is the WORST EVER...thats why i now go to Tyre Experts....much better

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

Try motor sport wheels and tyres on sth gippy hwy in dandy, bought my wheels and the last 2 sets of tyres from there.

all for saving money, but just be careful we don't go giving guys with sub 200+rwkw an option and an idea that's viable and safe to buy $50 255 tyres and think they are perfect. sure there are some accident write off on's etc and some are probably okay, but some are probably rubbish too. just be careful please.

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

tyrepower hawthorne, ask for mickey and tell him hamish sent ya :down:

235/40/18 on a 10... i can see why a lot of places wouldn't do it.

lol... 235 on a 10 is not that much of a stretch these days, not really legal though :P

why dude?

er... i'm guessing to fit under his guards / drift / have stiffer sidewalls / look cool

I had 235's on R34GTR wheels - and they looked stretched...

put them on a 10" is ohdears...

anyway - as paul said, please be careful, the tyres are cheap FOR A REASON. Just like ebay turbos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...