Jump to content
SAU Community

Japans Supercar Thread...


Recommended Posts

Periodically, I`ll be posting up what I know about all the famous, and not so famous modified cars to come out of Japan. If anybody has a car that they want to post about, please include at least one photo and some kind of spec sheet or info about the mechanical spec... lets keep the speculation to a minimum! :D

First up... the Nismo 400R...

400r.jpg

400R / R33 GT-R (Std.) / 400R improvement:

Overall Length: 4,675mm / 4,675mm

Width: 1,830mm / 1,780mm / *50mm wider fenders

Height: 1,330mm / 1,330mm

Wheelbase: 2,720mm / 2,720mm

Tread: Front: 1,500mm / 1,480mm / *Offset 30mm>20mm

Rear: 1,510mm / 1,490mm

Low Rideheight: 30mm / ------- / *For posture + stability

Weight: 1,550kg / 1,540kg

Engine: RB-X GT2 / RB26DETT / *Increased displacement

BorexStroke: 87.0 x 77.7mm / 86.0 x 73.7mm

Displacement: 2,771cc / 2,568cc

Compression: 8.5 / 8.5

Power: 400ps@6700rpm / 280ps@6800rpm

Torque: 47.8kg/m@4400rpm / 36.0kg/m@4500rpm

Boost: 1.1 bar / 0.6 bar

Power/Weight: 3.88kg/ps / 5.50kg/ps

Headgasket: Nismo Metal 1.2mm / Graphite 1.2mm / *High boost durability

Camshaft: Standard / Standard

Valve Spring: Standard / Standard

Oilcooler: Air cooled type / Fluid cooled Oil cooler

Turbocharger: N1 spec Highflow / T28 standard / *With stronger actuator

Intercooler: Nismo High Efficiency / Standard / *Higher cc/m flow

Cat Conv. : 80mm Low Restriction / Standard

Exhaust: Titanium Dual 60mm / Standard / *400R Lightweight Titan.

ECCS: 400R Special tune / Standard / *High efficiency tuned

Fuel Pump: Standard / Standard

Clutch: Nismo 8.5" Cro-moly / 250mm Single plate

(Twin-plate)

Transmission: FS5R30A Standard / FS5R30A Standard

LSD: A-LSD / A-LSD

Prop Shaft: Nismo Carbon / Standard / *Lightweight

Brakes: Standard (Brembo) / Standard (Brembo)

Brake Pad: Nismo OriginalType 2 /Standard / *For Street and Track

Suspension: Bilstein Shocks / Standard / *Firmer Rate

Spring: Nismo OriginalType D /Standard / *Fr:7kg Rr:8kg

Engine Mount: Nismo Stiff Mount / Standard / *Stronger Mount

Wheels: 10JJx18" / 9JJx17" / *18" 3-piece Forged

Tire: 275/35-18 / 245/45R17

Aero Parts: Nismo Original Kit / Standard / *Improved Downforce

/Cooling

Front Bumper: Nismo 400R Orig. / Standard / *Oil Cooler Duct

Front Grill: Nismo 400R Orig. / Standard

Front Lip: Nismo 400R Orig. / Standard / *Increased Cooling

Side Step: Nismo 400R Orig. / Standard

Rear Bumper: Nismo 400R Orig. / Standard / *Improved Aerodynamics

Rear Spoiler: Nismo 400R Orig. / Standard / *Increased downforce

Bonnet: Nismo GT Type / Standard / *Large Cooling Vent

Over Fender: Nismo 400R Orig. / -------- / *25mm wider each side

Tower Bar: Nismo Titanium / Standard / *Increased rigidity

Badge: 400R Type / Standard / *400R Identification

Meter Panel: 400R 320km/h / Standard / *Nismo Cluster

- 11,000rpm/

Seat: Nismo Embroidered / Standard / *Nismo Logo Standard Seat

Headlights: HID System / Standard / *Optional HID Headlights

_____________________

Nissan released only 99 400Rs in Feburary 1996. The V-spec version of the R33 GT-R was used as a base for the 400R, to produce a road-going version of the LM and GT racecars of the day. Most parts have been upgraded, but it`s probably more interesting to look at what hasn`t been upgraded, namely the Brake calipers/disks, the gearbox and the Camshafts/valves. The standard 5MT gearbox is suited well enough to the increased horsepower, as are the Brembo brakes, which only neccessitated a brake pad upgrade. The primary goal of the RB-X GT2 engine design was the increased torque whih came about with the 2.8L capacity increase. 47.8kg/m@4400rpm neccessitates the Twin-plate heavy duty chro-moly clutch upgrade, aswell as the Carbon driveshaft. All these additions serve not to break away from the base GT-R design, but to enhance the base GT-R V-Spec model one rank up in the GT Street class. The retail price of the Nismo 400R in 1996 was 12,000,000 yen.

/Rezz

Link to comment
https://www.sau.com.au/forums/topic/29219-japans-supercar-thread/
Share on other sites

reckon you could find some info on these cars:

Toyota TF103 F1 car

Nissan Skyline 2000RS and the oldschool KPGC10 track cars? Feel free to delete this post once you've read it Rezz

yeh rezz my dad has a kgc10 gtx with this nuts l28 under it.

could you get some real nice pics of em and info of the s20 engine.

also i think one on the gtsR or the autech r31.

if you need pics of the auctech 31 i have some pm me ok bye

hey rezz....i cant find any info on the r33 280MR Gts-t that i see on GT2...does it really exist or is it just a Playstation bug...LOL

Oh yeah... it`s a real car alright. What a beauty :headspin:

*I'll re-post details of this car on the weekend sometime...

280mr.jpg

  • 2 weeks later...

ECR33 Nissan Skyline 280 Type MR

280threequarter.jpg280rear

280front280engine1

280engine2280frontbrakes

280 Type MR specs / Std. ECR33 Type M specs

Vehicle Name: 280TypeMR / GTS25T TypeM

Vehicle chassis no: E-ECR33 / E-ECR33

Length: 4640mm / ←

Width: 1720mm / ←

Height: 1310mm / 1340mm

Wheelbase: 2720mm / ←

Tread: FR 1480mm / ←

Tread: RR 1470mm / ←

Ground Clearance: 105mm / 135mm

Weight: 1400kg / ←

Engine type: REINIK RB-XⅡ(RB25) / RB25DET

Engine: 6 cylinder water cooled 24-valve DOHC Turbo / ←

Bore x Stroke: 87.0×77.7 / 86.0×71.7

Displacement: 2771cc / 2498cc

Comp Ratio: 8.5 / 9.0

Power: 300ps @ 6400rpm / 250ps @ 6400rpm

Torque: 35.0kg/m @ 4800rpm / 30.0kg/m @ 4800rpm

Power/Weight Ratio: 4.67 / 5.60

Headgasket: Metal 1.2mm / Graphite 1.2mm

Conrod Length: 119.5mm / 121.5mm

Oilcooler: STD water cooled / ←

Turbocharger: R33 Type M / R33 type M STD

Intercooler: STD (lower left) / ←

Exhaust: NISMO Weldina (76.3 dia.) / R33TypeM STD

ECCS: 280TypeMR Special tune / R3TypeM STD

Clutch: R32GT-R Single plate / STD

Transmission: STD / ←

LSD: STD Viscous / ←

Brake: 4-pot Caliper STD (Type M) / ←

Brake Pad: NISMO Type2 / STD

Shock Absorber: NISMO 4-step adjustment / STD (fixed)

Spring: NISMO Original TypeD / STD

Badge Ornament: 280TypeMR Badge / STD

**The silver car above has has a complete R34 GT-R Brake upgrade, plus an East Bear Complete GT-R Intercooler Kit installed.

Nissan Prince Kanagawa produced only 7 (!!!) of these cars towards the end of '98 through to '99. Based on a standard ECR33 GTS25t Type M, Nissan Prince Kanagawa in asscociation with REINIK (Race and rally Engineering division Incorporated NIssan-Kohi) put together what is basically an RB25DET version of the Nismo 400R engine, minus the N1 Turbos labelled the RB-X. A full REIMAX 2.8L kit was used, giving what has been described as "wonderfully thick torque, that rises from 1600rpm like a demon...". Other areas of the car were also upgraded (ie: suspension, clutch, and ECU) although, like the 400R, it's interestting to note what wasn't upgraded, namely the transmission and the brake calipers/disks. A maximum 300hp on tap with plentiful torque made this car a pleasure to drive, and the 2.8L capacity (hence the "280" designation) is still available through REIMAX in kit form. The original selling price was 3,980,000 yen.

/Rezz

 

 

 

  • 2 months later...
  • 2 weeks later...
  • 1 year later...

Sorry to bump up this incredibly old thread, but I just noticed a 280MR (No.2) went through auction today. Starting price was 700,000yen, but I don't know if it sold. Built Feb 98, 80,000km on it

I'd never heard of them before!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...