Jump to content
SAU Community

Recommended Posts

get one from just jap cooling pro alloy one for r34 skyline they are cheap and work great

if urs is auto u will need to get a trans cooler for the lines that run into the stock radiator

if u need help just ring me and i will help u

myles 0432355971

Brent, if you're in Seven Hills often enough anyway drop into UAS down the end of Tucks Road and have a chat to them, they may be a bit more expensive, but have worked on quite a few Stageas around the area now and know what the go is.

First of all you need a new radiator, not another used one. Second you should be able to get one from a radiator repair shop. In New Zealand I can get a generic replacement (or a thicker one) with the hoses and trans pipes in all the right places. they just look in the Natrad catalogue. I haven't heard either way if this is possible in Australia but i should imagine it is.

An aluminium or any other radiator without the heat exchanger for the auto trans is no good (unless you have a manual of course). The primary purpose of the heat exchanger is to raise the trans fluid to its optimum operating temperature as quickly as possible and the secondary function is to provide additional cooling.

This primary function will not be acheived with more or bigger seperate trans coolers and since most trips are less than 10km it is important for the auto that the fluid goes through the radiator.

Yes the stock radiator has a plastic top but it has probably lasted 10 or more years.

[To give an example of the importance of the heat exchanger... her indoors was compaining that she would have to buy a new car because the auto trans in her Toyota Corona was stuffed and she didn't want to pay megabucks to overhaul it. It would n't change into top gear until about twenty minutes' driving i.e. normally not at all on most short trips. I fixed the problem with a twenty dollar thermostat - the old one was stuffed and opening at 55 deg so that the engine was taking forever to get up to proper operating temp and therefore so was the auto.]

You beat me to it re. the missing heat exchanger on aftermarket radiators Rob. I wish we could just buy the cheap alloy radiators from Just Jap etc.... but none of them cater for autos. Good fix with the thermostat.

Yeah or get it re-cored I guess; that is what I always thought I would do. Cause for a new stocker it would probably have to come from Nissan who would probably charge the earth? Pity we don't have something like Natrad in Australia... :) Maybe a re-core would be doable though just gotta ring around (same as a new radiator as I understand it; they replace the fins/core. although stag radiators have plastic end tanks, not sure if that makes a difference).

so its probably best to get a stock one then? lol less stuffing around straight out and striaght in. alloy would be nice though. but i will stop by UAS and see what they say.

I have a s/hand auto radiator for sale $80 plus delivery if you are interested

http://www.skylinesaustralia.com/forums/St...ad-t290912.html

...

Pity we don't have something like Natrad in Australia... :D

...

Assuming you were being serious:

Yes we do - they're called Natrad

http://www.natrad.com.au

Assuming you were being a smart arse:

Smart arse...

:)

Assuming you were being serious:

Yes we do - they're called Natrad

http://www.natrad.com.au

Assuming you were being a smart arse:

Smart arse...

:)

HAHAha well there you go, I learn something new every day!!!

went down 2 UAS in seven hills yesterday and booked her in for a service. Asked about the radiator and they suggested alloy straight away and said its better with the addition of the after market trans cooler than the stock oil cooler. rekons it would take 3 hrs to install? im thinking about it.

He said they deal with a few M series stageas... who of you guys goes there and how good are they?

yeah not just a question of cooling capacity (alloy w/big external cooler will cool more yes) but it's also important to not have *too* much cooling capacity when it's cold, with no way of heating the transmission fluid up to minimum operating temperature (which is what the stock radiator does - Rob explained it well in post #6).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...