Jump to content
SAU Community

Recommended Posts

I've been on the search for one pretty much since I bought my R34gtt - still nothing I can find off the shelf that 'just works' yet - and pretty much everyone (including manufacturers) I've talked to saying 'you're never going to find something that does without going a custom core & piping'. There is the ARC SMIC, but that's not an FMIC, the core size doesn't (to me) seem like much of an upgrade, and it's quite expensive (unless you can find one second-hand at a reasonable price).

I've seen a few people on the forums using an XR6T core or uprated (larger) XR6T core with custom piping to the factory location, but given the XR6T core size vs factory R34 GTT size, it doesn't seem like much of an upgrade - though the slightly larger/uprated XR6T core size might be a go. Either way, it still isn't something straight off the shelf that you can bolt in yourself.

Given the legalities here in SA for me, I'm not risking putting an FMIC on my car unless I have guarantees that it doesn't cut anything (which can result in losing my insurance coverage or breaking ADRs - resulting in a defect situation). I've witnessed firsthand how anal the vehicle inspectors can be - it's just not worth it to me.

  • 1 month later...

What about this HDI GT spec intercooler kit?

http://www.skylinesaustralia.com/forums/Hd...co-t297766.html

Looks like thats a diy bolt on kit.

From the power list of rb25s, looks like its well worth the effort:

R34 GT-T (Manual)

Blitz LM Pod Filter with Cold Air Feed

HDI GT Spec Intercooler

Custom 3" Turbo Back Exhaust

Stock Turbo

Stock Internals

Stock Boost Controller

Stock Tune

207.9 RWKW @ 11 PSI

I am looking at getting one myself!

Edited by Harey

I dont see anywhere there that it says no cutting required? Or did i miss it?

All the Japanese and Chinese kits are "Bolt on", but the bits around them dont bolt back on without a trim here and there...

If you do it very carefully you can do it to such tight clearances that if you get it all filed back nice and painted, its hard to spot.

You can also paint the core black so its not noticed either.

Infact i just read the installation for them, and they are even worse for cutting/smashing/bending than any other japanese or chonese kit i have ever seen lol

Wow yeah i did too, theres heaps of modding required!

Woops, sorry for the mislead.

Wow yeah i did too, theres heaps of modding required!

Woops, sorry for the mislead.

they take no more cutting than the rest they just tell you about it where the others dont . look in the stagea section . there is an abundance of people with fmic that return through standard pipe

JustJap.com have a return flow type intercooler that is bolt on for the R34 GTT, I am looking to install one of thes.

http://justjap.com/store/product.php?produ...=1&featured

This would ultimately be the best/no cut up your car install for the money!

JustJap.com have a return flow type intercooler that is bolt on for the R34 GTT, I am looking to install one of thes.

http://justjap.com/store/product.php?produ...=1&featured

This would ultimately be the best/no cut up your car install for the money!

For the price of the Blitz CS, i wouldnt even look at the JJR one.

  • 1 month later...

I just put in the blitz one on the weekend. Extremely happy with it!

Required a small amount cutting of cutting of the front brace thing, (not sure what you call it, bit of metal that sits in front of the thermo fan, between the lights). But this amount of cutting to less than 5 mins with the cordless angle grinder...

Out of my stock bumper i cut the whole black middle plastic part out + a tiny bit more of the white plastic. also had to cut alot out of the right air intake piece (infront of old side mount).

The piping was a perfect fit and the mounting required NO bashing at all! used 2 small washers to mount it a couple of mm forward to clear the thermo fan motor.

I'll get a pic up for ya when i get a chance

I just put in the blitz one on the weekend. Extremely happy with it!

Required a small amount cutting of cutting of the front brace thing, (not sure what you call it, bit of metal that sits in front of the thermo fan, between the lights). But this amount of cutting to less than 5 mins with the cordless angle grinder...

Out of my stock bumper i cut the whole black middle plastic part out + a tiny bit more of the white plastic. also had to cut alot out of the right air intake piece (infront of old side mount).

The piping was a perfect fit and the mounting required NO bashing at all! used 2 small washers to mount it a couple of mm forward to clear the thermo fan motor.

I'll get a pic up for ya when i get a chance

Cool - looking forward to seeing the pic!

I've sold a few of these kits already and not one customer has made any complaints on the ease of installation.

Yeah the only thing I was really worried about is having to cut bits of the car away!

I guess you would know though - are there any coolers available suiting the gtt where you wouldn't have to cut anything?

  • Like 1

After insatlling this one, I'd say there's just no way you could get a decent sized intercooler into the front without the need to cut anything at all...

But there really was f-all metal to cut out to fit this one. It was just the metal bracket that goes in between the front lights. Had to trim it so it went over the top of the cooler.

19022010605.jpg

Wish i took more pics of the install and what i had to cut out... but i was too keen to get it back in and going

24022010616.jpg

Really need to get one of those small number plates now to get full use of the cooler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...