Jump to content
SAU Community

Auto-wing Mirror Retract Unit For R33's

Tommy_J
 Share

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Samon Proficient

Samon

Posted
Posted

My 33 has always done this... I just leave the switch in the 'extend' setting and it retracts when I take the key out and extends when I put it back in... I can lock them out by putting it into 'neutral' once they're out... I always thought this was just a standard feature! Stock Series 1 R33... maybe I'll have to have a poke around and see if there's any funny business going on behind there...

Tommy_J Contributor

Tommy_J

Posted
  • Author
Posted
So does it fit R32?

Should work fine. Just don't know which wires to cut on the loom. I've been trying to get a hold of wiring diagrams for the R32 and R34 cabin without any luck. But:

FOR R32 and R34 owners: You can check to see if you've got the following 4 wires behind your Mirror control switch:

DARK GREEN with black stripe

CYAN with black stripe

CYAN with yellow stripe

BLACK

If you pop out the switch assembly panel (the small switch panel that controls the mirrors), you can check the wire colours.

Easiest way to do this is pull the fuse panel off and push the switch panel out from underneath. Would do it myself but don't have access to either of these models.

Tommy_J Contributor

Tommy_J

Posted
  • Author
Posted
My 33 has always done this... I just leave the switch in the 'extend' setting and it retracts when I take the key out and extends when I put it back in... I can lock them out by putting it into 'neutral' once they're out... I always thought this was just a standard feature! Stock Series 1 R33... maybe I'll have to have a poke around and see if there's any funny business going on behind there...

hmm, yeah not sure, sounds like it's been customised. Would be interested to know how it had been done if you end up checking it.

R.C Enthusiast

R.C

Posted
Posted
hmm, yeah not sure, sounds like it's been customised. Would be interested to know how it had been done if you end up checking it.

Hey all,

Just installed one of these units courtesy of Tom and works a treat.

My car (R33 SII '96) has a turbo timer too, mirror's fold in after the timer expires and engine turns off with no problems.

Haven't had any issues, installation was pretty easy - great instructions that come with it too! The unit itself is nice and neat, very proffessional.

Nice work Tom...what are you going to come up with next!??

R.C Enthusiast

R.C

Posted
Posted
Hey all,

Just installed one of these units courtesy of Tom and works a treat.

My car (R33 SII '96) has a turbo timer too, mirror's fold in after the timer expires and engine turns off with no problems.

Haven't had any issues, installation was pretty easy - great instructions that come with it too! The unit itself is nice and neat, very proffessional.

Nice work Tom...what are you going to come up with next!??

Also forgot to mention - mine never auto retracted, didn't matter what position the switch was in. If I left it in the extend position, once the engine was switched off they stayed extended. Only ever folded in manually, then had to flick the switch to get them back out next time.

Seems strange for an OEM to have different functions on the same model...I would think that some peoples must have been customized.

When I installed mine, still had what looked like the factory tape/quality check marks etc on the loom so looked pretty standard.

Tommy_J Contributor

Tommy_J

Posted
  • Author
Posted
Hey all,

Just installed one of these units courtesy of Tom and works a treat.

My car (R33 SII '96) has a turbo timer too, mirror's fold in after the timer expires and engine turns off with no problems.

Haven't had any issues, installation was pretty easy - great instructions that come with it too! The unit itself is nice and neat, very proffessional.

Nice work Tom...what are you going to come up with next!??

Cheers mate, appreciate the feedback! Yeah I was confident there wouldn't be any dramas with the turbo timer in there as well. Just means it waits until the timer has done it's business first.

No idea what the next project will be. Finished the prototype for the digital boost gauge a while back (see attached) aptly named 'Poo Gauge'. Haven't taken it any further though.

post-59038-1265254320_thumb.jpg

There's a tonne of stuff I'd like to do (EBC, digital tacho, boost cut, injector duty cycle sensor etc.) IE stuff that's mostly been done before! :happy: Just depends on how much longer I'm unemployed for.

charlie22 Community Regular

charlie22

Posted
Posted
My 33 has always done this... I just leave the switch in the 'extend' setting and it retracts when I take the key out and extends when I put it back in... I can lock them out by putting it into 'neutral' once they're out... I always thought this was just a standard feature! Stock Series 1 R33... maybe I'll have to have a poke around and see if there's any funny business going on behind there...

+1 My 34 is the same, but it retracts when i lock it and extends when i turn the ignition on.

Tommy_J Contributor

Tommy_J

Posted
  • Author
Posted
+1 My 34 is the same, but it retracts when i lock it and extends when i turn the ignition on.

I'm getting the feeling this is probably a feature that comes with some alarm systems maybe?

Picked my unit up from Tom yesterday. Really knowledgable guy. I highly recommend him.

Thx mate, nice '33 you got there! Did you have any dramas installing it? On that note - I encourage people to have a go at installing it themselves. Really not that hard. Attached is the installation instructions.

MIRROR_CONTROL_UNIT_INSTALLATION_GUIDE.pdf

.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted (edited)
+1 My 34 is the same, but it retracts when i lock it and extends when i turn the ignition on.

I.. Am.. Not... Jealous

PS.. love the instructions.. Call it "the unit"... hehehehe UNIT

and step 5.. Let it dangle out.. misses would love me working on the car now :P can't see how it makes the soldering easier though

Edited by .:: GimpS-R34 ::.
Tommy_J Contributor

Tommy_J

Posted
  • Author
Posted
I.. Am.. Not... Jealous

PS.. love the instructions.. Call it "the unit"... hehehehe UNIT

and step 5.. Let it dangle out.. misses would love me working on the car now :) can't see how it makes the soldering easier though

I also had "step 15: drink beer" in there, but thought I'd take it just to make it look a little more professional :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...