Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

The Jun motor ran 13.6@190kmh Ants car ran 11.7@209 with wild wheelspin.The bullshit stops on the track.

No other street SR has gone 130mph so yes it is WAs wildest- No ELF fuel used as in the Jun job And Ants makes this power on a Dyno Dynamics dyno with Accredited shootout The Jun car was on a Dynojet that is WA famous for funny power readings But as i said the "Bullshit stops at the track" Prove us wrong Denver but don't make excuses as Ants car has plenty of those also.We can arrange a meeting at the Plex if you like.

Bring the Red S14 down also and run it against a near stock (pistons+ Rods only internal mods)S13.PSI2FLY.

steve, i thought it made 5 somethin on the formaz dyno ? is theres a dynojet ? what were the driving skills like when it did a 13.6 ? just curious as a guy i knows s14 ran 12.8 last wednesday on street tyres and his just has gtr fmic, zorst and 1 bar boost ?? am i missing something ??

also what sort of boost was ant's 1600 runnin when it made 440 rwhp ? 30 odd psi ? what hp could u expect from it on say 15-20 psi ?

*sigh*

It made 730 on ivans dyno recently too steve, as for the track, it was never in a propper drag car, it was never intended to get a quick time that day, put the slide rule calculator away for now..

Show me anyone who can put 700hp through a 255 radial tyre, and not have a 400 meter burnout

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...