Jump to content
SAU Community

Recommended Posts

Fitted my new wheels to the GTR today so thought i would post up some pics to see what everyone thinks! :)

Finally got rid of the RP01's that came with the car, have upgraded to some Enkei RPF1's in 18 x 10.5 +15 all round with some 265/35/18 Toyo Proxes T1R, the new wheels are so much lighter than the old ones!

gtr7.jpg

gtr14.jpg

gtr4.jpg

gtr12.jpg

gtr18.jpg

More pics here :

http://www.flickr.com/photos/31015682@N03/...57622787290008/

Link to comment
https://www.sau.com.au/forums/topic/296031-new-wheels-for-my-r33-gtr/
Share on other sites

That is a good looking gtr!

Is it on standard suspension or?

How much camber on rear wheels?

Cheers

The car is on Tein Super Drift coilover which are from my old ECR33, had the rear shocks modified to fit my BCNR33, the car can go much lower, all the other suspension components are standard, gaurds are all standard to, no rolled lips etc etc

Cheers

I wanna lower mine too!!!!!!! :P

Any lower than what it is now and im forever scraping the front lip (dahm series 3 extended lip lol) and chewing out tyres majorly, thinking of possibly getting camber arms front and rear a bit later on then lower it back down to where i used to have it, i like it the way it is at the moment though :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...