Jump to content
SAU Community

Recommended Posts

Cars currently in highfill atm possibly gettng the paint sprayed over the weekend or monday

Will be heading down to the shop this arvo to check out progress, don't worry once I know I'll post pics for you

Still waiting on the wheels from NSW, and some other accessories

ahk cool thanks should turn out great!!!

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Have bought some more accessories to try and clean up the car a bit for show days

Bride Low Max Gias

post-59566-1260402995_thumb.jpg

Zex Show Purge Kit (Green)

post-59566-1260402984_thumb.jpg

Momo Drift Steering Wheel + Boss Kit

post-59566-1260402989_thumb.jpg

Only thing I still need to get is the roll cage and then it'll be down to suspension upgrades and engine conversion for end of next year

I'm subscribed to this thread. I like your idea mate...but I'm just worried that all that 'mixing and matching' of bodykit parts will make the car look wierd...I've never mix and matched parts before so I don't know but fingers cross it will look nice. You should have gone Do Luck front bar or 400R front bar...as all the other areas are a bit 'extreme' and yet the GTR front bar is probably going to look to tamed for the rest of the car.

However, it's coming along nicely mate...good luck with everything...

Have bought some more accessories to try and clean up the car a bit for show days

Bride Low Max Gias

post-59566-1260402995_thumb.jpg

Zex Show Purge Kit (Green)

post-59566-1260402984_thumb.jpg

Momo Drift Steering Wheel + Boss Kit

post-59566-1260402989_thumb.jpg

Only thing I still need to get is the roll cage and then it'll be down to suspension upgrades and engine conversion for end of next year

Damn....Daniel, you're going full ball with this, aren't you...make sure you pace yourself...modifying your car too quickly can cost a shitload and ruin your love for your car as you'll get bored when it's all done and you've driven it around a few months...slowly slowly mate...if your car is a GTS4 - make sure you Rb26DET and turbo kit the f**kaah! :(

This is Stage 1 about to be complete Kevin, then yes most likely RB26 will get dropped in end of next year or 2011 so project will be continuing...then possibly onto a drift car after so I wont get bored lol

Kevin only reason I had the Do Luck skirts was to put the carbon lip on them, you'll see what I mean when its done...and the 400R Rear Bar is just so its a bit lower at the back end of the car

This is Stage 1 about to be complete Kevin, then yes most likely RB26 will get dropped in end of next year or 2011 so project will be continuing...then possibly onto a drift car after so I wont get bored lol

mate, it's going to rock...make sure you pace yourself.

All good don't worry funding will run out after a while and I'll have to save up again so it won't be done in a hurry. Havent seen any pics of your car at all Kevin...could you PM me yours wouldnt mind checking it out as I see your post a fair bit I'm sure your well into your build?

All good don't worry funding will run out after a while and I'll have to save up again so it won't be done in a hurry. Havent seen any pics of your car at all Kevin...could you PM me yours wouldnt mind checking it out as I see your post a fair bit I'm sure your well into your build?

hi mate, my gtr is at the workshop getting tuned with new performance mods. Cosmetically, it is just a r33 gtr vspec with a genuine Nismo 400r front bar, that's it. Doesn't stand out too much. I'm actually doing the opposite to you, I am after a stealthy look. have taken off all my badges too.

New pictures of car before and after shots, and also how the colour varies in different lights.

Body prepped and ready to paint

post-59566-1260626998_thumb.jpg

Paint done without clear

post-59566-1260627164_thumb.jpg

Paint with clear coating

post-59566-1260627269_thumb.jpg

Boot lid looks like is dripping candy bronze during natural daylight

post-59566-1260627053_thumb.jpg

At night under factory lights the car looks gold

post-59566-1260627212_thumb.jpg

Other pics will be up end of the week once car has been fitted and new wheels and parts installed

Its like a copper bronze, cause Top Secrets a bit to light...but as i said under different light it looks totally different, cant wait to see what it looks like when its out of the booth on the road though cause that'll be the true colour for it

Its like a copper bronze, cause Top Secrets a bit to light...but as i said under different light it looks totally different, cant wait to see what it looks like when its out of the booth on the road though cause that'll be the true colour for it

Nice colour choice...whether it's pretty or not, one thing is I've never seen another Skyline with this colour on the roads!

You do realise that after the paint dries properly, it will slightly change and then set - this will be it's actual colour thereafter.

Remember to give it good drying time mate...there's no rush...I suppose.

It will be sitting in the shop for a week before it comes out into the sun, it already sat in highfill for a week after that was done...gives the paint time to harden.

This is also why i went to DNA Paints to get something different from the normal, black, white, silver, red, blue, green, orange, purple sort of colours, at least u'll know u spotted me on the roads, most likely nepean or prinny hwy or in sth east area.

It will be sitting in the shop for a week before it comes out into the sun, it already sat in highfill for a week after that was done...gives the paint time to harden.

This is also why i went to DNA Paints to get something different from the normal, black, white, silver, red, blue, green, orange, purple sort of colours, at least u'll know u spotted me on the roads, most likely nepean or prinny hwy or in sth east area.

Yeah mate...cannot wait...you'll be noticeable that's for sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...