Jump to content
SAU Community

Recommended Posts

Im looking at running my R round a track in a couple of weeks, what are the basic things to do before I go?

I have read about overfilling the oil for the day, but how much?

Got good brake pads and fluid.

Will check tranny level.

Anything else?

Will the stock turbos be ok with the restrictor removed or should I put it back for the day?

Link to comment
https://www.sau.com.au/forums/topic/296683-r33-gtr-basic-trackday-prep/
Share on other sites

With ceramic turbos you want to run the least ammount of boost as possible to prolong the life of them, if you have steel wheel turbos then knock yourself out. I overfill to the kink in my dipstick, but otherwise have a read of the other trackday pre threads, also might be worth borrowing a windeband o2 sensor or getting a dyno run done to make sure the AFRs are safe.

Cheers guys.

I had a bit of a search around before I asked but couldnt find much (except the oil control thread and Im not gonna pull the engine to put an extra oil drain on it!)

I have the stock turbos so stock boost it is.

How much should I overfill the oil? I have read it should be up to the hump in the dipstick but is that when hot or cold?

yeah about there, that is generally 1lt more.

even more important is to put in good quality brake fluid like motul rbf600. totally bleed the old stuff out until you see the new stuff running through (careful not to run it dry while doing this)

check all fluid levels (might take all day, gtrs have a crazy number of fluids).

since its hot make sure you have bleed the coolant properly.

if you are going to do more track days, consider adding an oil cooler. if not keep it to 3-5 laps flat out, or 5-8 laps at 80% (which is all most people manage on their first track days)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...