Jump to content
SAU Community

Recommended Posts

What guages do you guys find useful?

I currently have a boost gauge and an oil pressure gauge, both of which are obviously also standard on the dash to some degree.

What other type of gauges and what reason do you have them?

Link to comment
https://www.sau.com.au/forums/topic/29761-what-guages-do-you-find-useful/
Share on other sites

In short, none, boost and oil is about all you want, extra tacho's are wank, if you want a shift light, just get a shift light, water temp can sort of come in handy if your keenish to do motorsport, because factory water temp guages don't really show temp varients of a couple of degree's..

other than that, stick with what you have, its all you really need.

I've got a sweet little temp sensor rigged up inside my cai partition. tells me the intake temps on hot days and gives me a rough feel for how the car should be performing etc.

it's connected to a blue EL light thingo which also has a voltmeter on.

loud stereo = need for a voltmeter. I'd like an ammeter too, but the feckin batterys in the boot, innit.

I'be got a hks boost gauge (reads up to 2bar) currently running 1 bar through the turbo and a greddy oil pressure gauge. I've found the gauges move much quicker than the stock ones plus being mounted on my a-pillar they are easier to read than the stock ones without taking my eyes off the road too much.

I've got a sweet little temp sensor rigged up inside my cai partition. tells me the intake temps on hot days and gives me a rough feel for how the car should be performing etc.

Me gots one of those units too.... bought it ages ago when I done my CAI.

All up I've got displays for

Rich/Lean bar Graph

Intake Temperature

Volt Meter

Boost

Speed alert

Revs

Digital Tacho

Shift Light

Trip Computer

Airflow

Knocking

Throttle

and more......

....love the blue Screen stuff :)

How much are they and where can I get me one? :)

Me gots one of those units too.... bought it ages ago when I done my CAI.

All up I've got displays for

Rich/Lean bar Graph

Intake Temperature

Volt Meter

Boost

Speed alert

Revs

Digital Tacho

Shift Light

Trip Computer

Airflow

Knocking

Throttle

and more......

....love the blue Screen stuff :)

do you honestly get much info from all those gauges though... i thought it would be easier to drive a car when u knew only select things. So you don't look at your volt meter bouncing while you're stereo's blasting and not concentrating on the road...

Then again those DEFI Link gauges are sweet as.

i only would need decent boost gauge oil pressure oil temp and possibly water temp...that about it the main two i would want is boost and oil temp.

Yepp, same here.

Boost gauge cause the factory one is slow and not in bar or psi :)

Oil pressue cause the factory one is slow and the sender can be dodgy.

Oil temp cause it give's you an indication on how the motor is and also can monitor it when cooling the motor down.

Water temp would also be a go'er if your doing some track work.

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
    • Are you guys meeting up with the Sydney SAU guys at Lambton Pool Carpark or heading straight in?
×
×
  • Create New...