Jump to content
SAU Community

Recommended Posts

what I mean is, $1000 on a vid card when it is probably something I may upgrade in a few years is a bit pricey...

as it seems anyway, I got the best card I could... no 295s in stock anymore either...

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

case = thermaltake armor +

PSU = 1000watt corsair

CPU = i7 920

ram = 6GB Dominator 1600

2 HDD's = Falcon G Skill2 (SSD's)

vid card = EVGA GTX295 Co-Op

mobo = EVGA X58

water cooling gear = blocks for cpu, mobo and vid card... pump, radiator etc

plenty good and plenty of room for later upgrades :D

The only thing there that isn't basically the best of the best is the CPU (overclock ftw) and the Mobo... but I don't feel like spending $700 on 4 way SLI that I'll never use.

With the exception of the case, reads as a nice build especially for O/C

For $1500? Not a lot...

There's some watercooling gear that comes with the case, but like I said, I'm replacing most of it. I think all that will be left is the pump, even though I want to replace that too, just no stock of the swiftech pump... so really, that leaves the built in reservoir.

sooo... what should i be buying?? :D

A computer.

You don't have the budget for a specialist machine for your intended purpose. You could get an older version of one of the workstation cards but in your case I'd get an i7 with 6GB ram so if you do get a workstation card later it will be worth it.

i dunno, say... $1500? Want to get it through my dad's work whilst the tax/rebate thingy is still kicking around

actually, that maybe bump the budget up... it's 30% isn't it?

FYI: Provided your dad's work turnover is less than $2million the tax break is 50% if purch before 31 Dec '09 then reduces to 30% there after till the end of next year. So, if that's any help in bumping up your budget to ~$2K, than it could be feasible for said workstation and with Quadro card.

The other option if your IT litereate you could soft mod a gaming GPU to emulate the equivalent workstation card but afaik there's only a select few cards that have been successful (eg. Nvidia 8800 series).

i7 920

ud3r

6gb gskill 1600

5770 or similar depends what u can get ur hands on

case what ever u want

blue ray combo drive

1tb hdd

1 ssd for OS

done

g5 and g15 for keyboard and mice or something similar

Where would I buy 5970 from in the states that ships internationally? And for a total cost of $700?

http://www.tilatech.com/ is where I've imported stuff from before and they were pretty good, so random that they sell rims now as well. There are a couple of others or you need a third party if you want to purchase from newegg as they don't ship to Australia and don't accept international payments.

What about those no name cases? China Cars?

Made out of the same stuff, possibly similar panels.

Edited by DivHunter

I don't see tilatech.com having ANY video cards, let alone stock of the 5970... So with the fact that it's more expensive, f**king massive, doesn't have many or any watercooling blocks, and that I can't even find one to buy, I'm going to stick to my 295 choice :D

Which by the way, was waiting for me at work along with everything else.

lol @ complaining about no water blocks on a car that has JUST hit the market.

EK will have blocks out in less than a month. Usually does.

There might even be a thread on it @ xtremesystems - sometimes he posts designs and whats coming etc

A US website that one of the guy from work here uses all the time is www.provantage.com Some prices are comparable with Newegg.

I dont entirely agree though with the posts mentioned before about us being ripped off and HEAPS cheaper in the US.

Honestly, please prove me wrong as I wanted to use provantage to get a gfx card but by the time courier costs and the dollar difference is added it is only a $30 saving when i was looking at a 4890.

Plus i was always told with electronics if it is not a huge price difference buy local as it is much easier to organise returns etc. The further away the harder it gets.

Again if i am wrong please let me know as I would love to find some good cheap gfx cards :-)

$30 here, $30 there - buy the time you add it up over an entire system build mate you are looking at probably $200-$300 on a $1500 system.

When newegg etc have some of their pricing deals - you'll see $50-$70 saved on a $400 item at times based on pricing here.

That could virtually put a nice SSD into your case or something that would really offer some good benefit

EDIT: also take into account you are paying single item postage. These guys are bringing in containers which are comparitably speaking are much cheaper again.

So if its $30 AFTER postage, it would be what... $35-$40 - which now brings you closer to $400 on a $1500 system give/take.

Overall that ain't a bad saving and clearly shows businesses here gouging pretty hard.

New release items are worst though - 5970 as the example

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...