Jump to content
SAU Community

Recommended Posts

How long is a piece of string unfortunately. ive heard of and seen $1000 dollar paint jobs through to $10000 paint jobs. Things in your favour: 1: New car so your current paint is a smooth base to lay new primer and paint over(hopefully) 2: Sounds like you want a single colour and without any candy or other expense adding extras.

You can save yourself money if you want to put in the effort of prepping the car for paint yourself, but in the end you get what you pay for in the finish. I would say ball park a couple of grand but hopefully people can shed some more light for you.

How much do paint jobs usually cost?

looking to get my white v35 changed to obisidian black

also comes down to how detailed you want it.. around inside of doors, etc.. lots of prep work.. best bet is go ask a few car sprayers.. also check their finished work before you go with them so you know what their quality is like

you always get what you pay for

Piece of string is best judgement haha

Depends on:

Quality of current paint

Whether you can do the prep work yourself

When it comes to painting do you just want the:

Exterior done

Exterior + Door jams

Exterior + Door jams + Boot + Engine Bay

Not sure what state you are based in, but places like Xxx Bodykits do full colour changes for $1900, average for exterior and door jams your looking around say $3000, then you can head into higher range quality paints as well like I'm getting DNA Paint so thats around 10,000 for exterior and door jams.

As craig and sean said, they can really vary depending on quality and how much you want painted.

I was looking to respray a clean r34 from white to black about a month ago.

If I was to strip the car and give them a shell, it would be 4-6k,

To let them strip the car I would expect to allow a further 1-2k.

These prices were from from DMD the Image (Brisbane).

I have seen their work and was quite pleased with it.

Obviously this is only my research, some people have had a car respray for a few hundred $$ + a carton of beer.

Cheers

how long is a peice of string.. seriously i can just pick a figure outta my head.. or you can go to a paint & panel and ask for a rough figure.. or call them.. not hard

just seeing if somebody has done it before and how much it costs, fair enough if you dont know, just dont reply with "how long is a piece of string" lol

Well actually matte black has become very popular over the last couple of years, so due to popularity its gone up in price so once again it can vary on the supplier.

My mate did it herself block back the car and used cans and it came out looking wicked...so you can give that a try and it'll be under $1000 haha :D

But professionally budget 5-6k

hey man if you want a paint job pm me and ill send you to my mate at 2sus if you want same colour it would prob cost you from 2 to 2500 and colour change without engine bay between 3500-5 have a look at some of his work he painted my last car and came out beautiful and im a fussy person

If you're referring to xxx bodykits in Melbourne... they start resprays at $1999, and they charge extra for colour change (doorjams etc).

But apparently they're work sux (looks like spray-can jobs). Or so I've heard from alot of their former customers.

If you want a respray...I'm guessing you want it to look good right? So if you're looking for something cheap, you might aswell get some VHT cans and do it yourself....coz it'll come out cr@p either way, but you'll save some money.

For a basic colour change, you're looking at $3000-$3500 minimum from a decent place. Pearls will cost you a few hundred extra atleast...Candy will set you back heaps because most spray-painters think they are a headache (ie. if they stuff up...it's much harder to fix it since the paint is translucent). I don't know what the heck obsidian black is....but you need to spend atleast $3000-3500, don't mess up your 35.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...