Jump to content
SAU Community

Who Here Can Help Me Install A Mechanical Lsd Into My Stock R33 R200 Housing?


Recommended Posts

As per thread: http://www.skylinesaustralia.com/forums/In...Ls-t299495.html

I bought a LSD but do not really want to fork out $690 to install it by a professional. I thought about attempting it myself but people have warned me if the whiplash is wrong, watch it eat itself to death.

SO I am being precautious here :(

Anyone that lives near Fairfield want to help? I have tools and air compressor but no breaker bar nor impact wrench, alternatively, I can drive the car to your home workshop and we can knock it back there!

I will pay you for your time and help you take out the diff, ra ra ra :(

Cheers,

Johnny

i think you mean backlash?

I've learnt two things in the last few years. unless you can do the job 100% right your self, pay some one to do it.

for two reason. your dont get dirty and if it f**ks up they fix it(assuming they f**ked it).

cheers

elliot

yea i agree with runnin4life, things never ever go to plan with these things, best pay someone else to deal with the problems :ninja: - good luck with whatever you decide to do though :)

I got quoted $550 from a well known place that's with my diff dropped out and brought to them

where do you guys recommend? in Syd?

So are they pulling the diff out and putting it back in for that price? You would want to think so.

My just had his centres swapped over cost him $150, I think the place is called D&R in Chipping Norton. Might be wrong on the name.

For that price, I have to take the diff to them.. all they're doing is swapping the centres over, and supplying new seals and 'maybe' bearings for $550. They won't even fill the oil up, I have to do it on my own.

I'll search on the yellow pages for that lot and see how I go.

Cheers!

Got quoted by another place

$250 to install centre, re-use old bearings (I bring diff to them)

+$50 for new seals

+$40 to be filled with oil

give the guys at award diff and gear box a call, I cant remember how much he charged me but pretty sure it wasnt that much.http://www.hotfrog.com.au/Companies/Award-Diff-Gearbox-Services

if u can bring it to wollongong i can do the swap for $130 cash, as i have done a few inculding shiming my diff

if all that needs to be done is swap the centres

chears Alaric

Edited by SUS_1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...