Jump to content
SAU Community

Recommended Posts

Hi fellas,

As the thread title suggests, I am just sick and tired of being defected by the cops all the time. As we all know, each time it is such a time waster and is so costly. Furthermore, I drive safely and considerately on the roads and don't hoon or anything but cops always chase me and give me grief and even once said that my car is a "cop magnet."

Anyway, long story short - I've recently bought a R33 GTR Vspec and want to keep this car as stealthy as possible, I've taken of all the badges including the GTR ones and removed all stickers...however, the next step is to make the car defect-free...how the heck do I do this? I've heard about getting the car engineered and be given an engineer's certificate...I have no idea what this is or where I can get this done in Melbourne - can you guys please shed some light on the matter.

I'd really appreciate referrals with contact details and estimated costings; all I can think that the GTR has that might be defectable are boost controller, Apexi Power FC, Twin Pod filters and a Blow off valve. Please give me some support here fellas, it's driving me insane and I find myself scared shitless sometimes when I'm driving around and a cop follows me...please share your experiences.

Many thanks,

Kevin

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

of course if you break the law then that's going to happen

if you want to avoid defects then keep it stock

or do minimal mods that can be changed back to stock with no fuss and little cost

Well, you've taken the right step to start off with. Taken all the badges off.

You don't need an engineers unless you are doing something major.

Boost controller = Defectable

Apexi Power FC = defectable

Twin Pod Filters = Defectable (mainly due to ignorant cops)

BOV = defectable only if it is venting to atmosphere.

SO:

Hide your boost controller in the cabin somewhere that is not easy to see. Then make sure the solenoid is buried somewhere in the engine bay, or painted black. Just make sure you can't see it.

The Apexi is fairly easy to hide, but just make sure you cover it up. The police have no reason to suspect you have aftermarket ECU if everything under the bonnet looks stock.

Twin Pod Filters scream "modified". best thing you can do is fold up some plastic sheet, or sheet metal painted black to look like a factory air box and put this over. If you are going to go the trouble, you might as well make a cold air box. (better performance in street traffic too.)

Plumb back the BOV

DONE!

Hi fellas,

As the thread title suggests, I am just sick and tired of being defected by the cops all the time. As we all know, each time it is such a time waster and is so costly. Furthermore, I drive safely and considerately on the roads and don't hoon or anything but cops always chase me and give me grief and even once said that my car is a "cop magnet."

Anyway, long story short - I've recently bought a R33 GTR Vspec and want to keep this car as stealthy as possible, I've taken of all the badges including the GTR ones and removed all stickers...however, the next step is to make the car defect-free...how the heck do I do this? I've heard about getting the car engineered and be given an engineer's certificate...I have no idea what this is or where I can get this done in Melbourne - can you guys please shed some light on the matter.

I'd really appreciate referrals with contact details and estimated costings; all I can think that the GTR has that might be defectable are boost controller, Apexi Power FC, Twin Pod filters and a Blow off valve. Please give me some support here fellas, it's driving me insane and I find myself scared shitless sometimes when I'm driving around and a cop follows me...please share your experiences.

Many thanks,

Kevin

You've gotta be joking?

Your other thread is 3 pages long, and in that i told you about 4 times how to go about it.

It is simply not worth trying to get the ADR Emissions done, therefore things like a PFC are still defectable - but given it is a 2min job to change... i dont see a problen.

I gotta say West, although generally I get left alone, I feel like I've been stalked/pulled over for nothing, and I am clean as a whistle in terms of police/driving records. Maybe I am just paranoid.

Agree 100% though, after market BOV is a real give-away and totally unnecessary in most cases.

Thanks fellas...I used to be a bit of a "ricer" to be honest, e.g. stickers, big wrings, decal stuff like that...now, I'm sick of it and love the clean and stealthy look...I've made my car look stock as a rock besides some nice Volk rims and a carbon fiber bonnet, the car looks stock as a freaken rock.

I think the trick is to hide, tuck away and make the car look as stock as possible. Besides that, there's no other way, right? I've learnt a few things...thanks all! Any other suggestions?

It's the BOV, PODS and Power FC that I always get done for usually...now with the BOV, I love the Ssshhttt sound of the atmospheric blowoff valve sound...just can't go back to stock...cannot, cannot....please God, please forgive me as I have sinned....with the PODS, I must have it too as I love the fluttering and sucking sound...and the Power FC - I need it for engine management, I even went as far as trying to hide my hand controller under my seat once but the guys in blue know where to search nowadays - any suggestions?

Well, you've taken the right step to start off with. Taken all the badges off.

You don't need an engineers unless you are doing something major.

Boost controller = Defectable

Apexi Power FC = defectable

Twin Pod Filters = Defectable (mainly due to ignorant cops)

BOV = defectable only if it is venting to atmosphere.

SO:

Hide your boost controller in the cabin somewhere that is not easy to see. Then make sure the solenoid is buried somewhere in the engine bay, or painted black. Just make sure you can't see it.

The Apexi is fairly easy to hide, but just make sure you cover it up. The police have no reason to suspect you have aftermarket ECU if everything under the bonnet looks stock.

Twin Pod Filters scream "modified". best thing you can do is fold up some plastic sheet, or sheet metal painted black to look like a factory air box and put this over. If you are going to go the trouble, you might as well make a cold air box. (better performance in street traffic too.)

Plumb back the BOV

DONE!

Thanks mate...your words have given me inspiration as I'm so close to giving up as I'm going paranoid...seriously, I love the GTR but it's getting a bit much and I find myself feeling paranoid on the streets... :)

I will spend some time in research how to hide the fuucckasss...

You've gotta be joking?

Your other thread is 3 pages long, and in that i told you about 4 times how to go about it.

It is simply not worth trying to get the ADR Emissions done, therefore things like a PFC are still defectable - but given it is a 2min job to change... i dont see a problen.

Hi Ash, yeah, I'm going a bit paranoid here - please forgive me. The other thread was more about how the heck do I clear the defect and how to extend the expiry date on the notice, whereas this thread is how to freak do I avoid any another of those yellow fuucckaass as along the years, I've had 4 yellow fairy canaries and 2 EPA emissions tests...seriously...for the love of God. :)

Factory GTR BOV's have a noise that only GTR BOV's produce... i cannot see how you need an ATMO, they do not have the teeter-totter of GTR items which is utterly unique.

And you do not need the H/C in the car. The check engine light lets you know if anyhing is going wrong, that is the whole purpose of it.

So have PODS, no problem. Factory I/C & BOV's, remove the H/C and honestly you will only get EPA's if you have a loud exhaust.

Also get rid of that HYBRID CF bonnet. It's a fibreglass hybrid, not pure CF, and just another attention attractor.

Also given you have had heaps of defects i think you would almost HAVE to be attracting attention by how you must be driving.

Hi Ash, yeah, I'm going a bit paranoid here - please forgive me. The other thread was more about how the heck do I clear the defect and how to extend the expiry date on the notice, whereas this thread is how to freak do I avoid any another of those yellow fuucckaass as along the years, I've had 4 yellow fairy canaries and 2 EPA emissions tests...seriously...for the love of God. :)

I've had more EPA's, less defects though - but that is because all my mods are hidden.

EPA was just for my old exhaust which was 110dB lol.

These days though its much much quieter so i expect less attention overall. Even on SAU cruises you cannot hear my car anymore :)

You can make 380rwkw mate without even an obvious mod - im not going into anymore detail though over the net.

LOL!

Why do you need BOV when standard gtr bov is as good? Cops don't follow you for no reason unless you've got a bad record on their system.

Just leave it standard....or with a pair of N1's, they can't tell.

i dont have a bad record and cops follow me when i take my skyline out they do u turns to come and pull me over and all :)

i dont think he was meaning they wait outside his house for him to go out and stalk him..

if you bought an import, you should've known that imports attract cops

you cant complain about being pulled over, especial if u have a CF bonnet and drive around with an atmo BOV,

its like saying, my car is stealthy, while painting it in a fluro color :)

Do you have fully sick cheap Chrome wheels? Stickers, HID, Loud Exhaust, Standout colour, gauges on the A-pillar, Bride Seat that you don't even do track work....................car that sit too low because you have a fully sick set of coil-over...................!

^^^

they can't claim you were hooning if you weren't

they need to witness hooning or have evidence to prove it

if they pull you over just going about ur business not doing anything wrong, and say you were hooning

that will never even make it to court

I've made my car look stock as a rock besides some nice Volk rims and a carbon fiber bonnet, the car looks stock as a freaken rock.

I like that part. Hardly stock looks wise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...