Jump to content
SAU Community

Wakefield + R35 + Willall Tune + Slicks = ?


Recommended Posts

I source the slicks from a guy who has contacts from the GT and porsche cup boys.

I caught

of an interesting tire setup i've not seen before on an R35.

You get a good look at the wheels/tires from about 3:00.

These seem different, yet again, from the latest Super Taikyu GT-R's wheel/tire setup.

Can't find any info on the net though.

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

I caught
of an interesting tire setup i've not seen before on an R35.

You get a good look at the wheels/tires from about 3:00.

These seem different, yet again, from the latest Super Taikyu GT-R's wheel/tire setup.

Can't find any info on the net though.

Thanks for the video, very interesting. Advan slicks hey... they look pretty much the same size that Martin, Marek and myself are running (18's too?). The car seemed a bit unstable under brakes? Maybe is was pushing really hard. Running aftermarket brakes and coilovers too.

Guys,

Just to put these times in perspective....check this out:

http://wakefieldpark.com.au/index.php?opti...2&Itemid=49

The lap records at Wakefield.....the GTR is up there with Porsche cup lap records and would have smashed the improved production record that currently stands by over 2 seconds.

Well done again guys on the times.

  • 2 months later...
Guys,

Just to put these times in perspective....check this out:

http://wakefieldpark.com.au/index.php?opti...2&Itemid=49

The lap records at Wakefield.....the GTR is up there with Porsche cup lap records and would have smashed the improved production record that currently stands by over 2 seconds.

Well done again guys on the times.

Not to mention they'd put the frighteners into some of the bike boys.

Thanks for the video, very interesting. Advan slicks hey... they look pretty much the same size that Martin, Marek and myself are running (18's too?). The car seemed a bit unstable under brakes? Maybe is was pushing really hard. Running aftermarket brakes and coilovers too.

What tyre size are you running with the 18's mate ?

Edited by The Law

tyres which seem to work are michelin 27/68/18's (all four corners).

weight reduction was Willall racing titanium exhaust and susequent power increase from same

next time out i will be running less pax seat (another -30kg), race wing and splitter (martin?)

tyres which seem to work are michelin 27/68/18's (all four corners).

weight reduction was Willall racing titanium exhaust and susequent power increase from same

next time out i will be running less pax seat (another -30kg), race wing and splitter (martin?)

Sounds NICE !!

With those quoted tyre sizes are they imperial measures ??

Guys,

Just to put these times in perspective....check this out:

http://wakefieldpark.com.au/index.php?opti...2&Itemid=49

The lap records at Wakefield.....the GTR is up there with Porsche cup lap records and would have smashed the improved production record that currently stands by over 2 seconds.

Haha, but to put that into perspective... these $160k+ cars with $x000's worth of mods only beat a Toyota starlet (on road tyres) by less than 4 seconds... ;)

But seriously, damn impressive times. I wish my car only took that long to get down the front straight.

No, they are metric sizes.

27 = 27cm = 270 mm tread width

68 = 68 cm = 680 mm overall diameter

18 = 18" wheel, OK this one is imperial

Thats a fair bit lless rolling diameter/overall diameter than standard tyres, do you notice the car is lower/guards dont look filled out ?

Edited by The Law

Very impressed with the times!

To put throw a few other cars times up- a dude off ausrotary did a 1.01 in his FD RX7 track car on 19 inh slicks, t04z- but as I said- full track car.

The Unique Autosports 300zx has done a 1.04.65- http://www.advanwheels.com.au/cars/unique-300zx.aspx

  • 2 weeks later...
Hey, can you post a link to the Natsoft results. Curious to see the times the MR2 you overtook at the 1min mark.

that was a practice day, no official times. Last time out with natsoft timing at wakefield (on re55's) i ran a 1:05.3 i think, so the slicks seem to be good for a second or so around there. We'll be going out again in the next few days to improve on these times i hope. Does anyone think we could manage a 1:02?

Edited by LSX-438

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...