Jump to content
SAU Community

Recommended Posts

Here's what I did over Christmas

I bought a 40mm triple core radiator from Just Jap Cooling-pro Skyline ECR33 (CPRO40mmRAD-ECR33) $329.oo. They have a 60mm as well but I was advised against it as it was suited more for a dedicated track car and it would have to go in without the shroud in place. I also bought a 7inch thermo fan for the auto cooler (Thermofan-7inch) $50.oo.With freight to the door it was $429.oo. Now when I go up the range the water temp is about 30deg lower the engine oil is about 15deg lower and the auto is about 20deg cooler. Temps were done using one of those laser heat guns tested before and after the upgrade.

Best money I have spent in a while. I will just have to see what winter brings and I will cross that bridge when I get there.

post-25786-1263189647_thumb.jpg

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Mine started to heat up especially with A/C turned on or on dyno.

Ebay alum. asi performance 52mm $199 delivered!

Sits at 84-85'c with A/C on, boosting and Qld summer.

### p.s. guage didn't move from 1/2 even at 99'c!!! ###

Edited by RED513

i got a new clutch assembly for the fan and that will be going in this weekend, the car has been staying cool while driving but i haven't had it stationary and idling yet which is when it heats up, fingers crossed the clutch assembly will get me out of trouble.

I will keep you updated

Problem solved guys, it was my clutch assembly for the fan, put on a new one, went for a drive and idled it with air con on and never went past half way. Many thanks for opinions and help, appreciate it.

  • 3 weeks later...
Here's what I did over Christmas

I bought a 40mm triple core radiator from Just Jap Cooling-pro Skyline ECR33 (CPRO40mmRAD-ECR33) $329.oo. They have a 60mm as well but I was advised against it as it was suited more for a dedicated track car and it would have to go in without the shroud in place. I also bought a 7inch thermo fan for the auto cooler (Thermofan-7inch) $50.oo.With freight to the door it was $429.oo. Now when I go up the range the water temp is about 30deg lower the engine oil is about 15deg lower and the auto is about 20deg cooler. Temps were done using one of those laser heat guns tested before and after the upgrade.

Best money I have spent in a while. I will just have to see what winter brings and I will cross that bridge when I get there.

post-25786-1263189647_thumb.jpg

Nice... please tell me where I can find an alloy radiator with the auto trans heat exchanger in the bottom!!

I allways wonder how people with Auto stags go upgrading their radiators....

Half the reason of the bottom tank for the trans auto fluid is to heat it up when the cars cold to get it to running temps. In the winter months with only a transcooler it shall be interesting.

Stags only lock up the transfer and go into overdrive once the trans oil temp reaches a certain temp so yeah it will be interesting.

Also touch wood but im in SA and have had some very hot 40+ degree days and sitting in start stop traffic with aircon cranking and my needle never moves. sits prob 1/5th below half all the time. Stock radiator with a FMIC and PWR V8 trans cooler.

I allways wonder how people with Auto stags go upgrading their radiators....

Half the reason of the bottom tank for the trans auto fluid is to heat it up when the cars cold to get it to running temps. In the winter months with only a transcooler it shall be interesting.

Stags only lock up the transfer and go into overdrive once the trans oil temp reaches a certain temp so yeah it will be interesting.

Also touch wood but im in SA and have had some very hot 40+ degree days and sitting in start stop traffic with aircon cranking and my needle never moves. sits prob 1/5th below half all the time. Stock radiator with a FMIC and PWR V8 trans cooler.

you're not looking at your stock water temp gauge are you? those bastards lie... i think it was QWK32 who was telling me that there's 2 temp sensors in the stag, one for the ecu and the other for the standard water gauge. an aftermarket sensor + gauge will tell you much more than the standard gauge will.

I just had my Stageas top tank replaced and radiator flushed. As it had a tiny leak.

Quoted $300 drive in drive out, done under warranty :laugh:

Cool... I have heard under $200 for top tank replace; I don't know if this includes a core clean or not (a 'flush' could mean they just let the coolant out and replace it... however that does mean another $50+ for new (decent) coolant) or whether it means I have to take the radiator to them. I assume I do.

But the standard core is only 16mm thick FFS. I don't want to spend at least half the cost of an alloy radiator on an old core, to end up with stupid plastic end tanks again, and a 16mm thick radiator which is only going to fail again in 6 months.

Trouble is I've been having a hell of a time finding any kind of aftermarket radiator which is thicker than 16mm and has the auto trans cooler/warmer built into the bottom, for under $1,000. So I don't know what to do.

Cool... I have heard under $200 for top tank replace; I don't know if this includes a core clean or not (a 'flush' could mean they just let the coolant out and replace it... however that does mean another $50+ for new (decent) coolant) or whether it means I have to take the radiator to them. I assume I do.

But the standard core is only 16mm thick FFS. I don't want to spend at least half the cost of an alloy radiator on an old core, to end up with stupid plastic end tanks again, and a 16mm thick radiator which is only going to fail again in 6 months.

Trouble is I've been having a hell of a time finding any kind of aftermarket radiator which is thicker than 16mm and has the auto trans cooler/warmer built into the bottom, for under $1,000. So I don't know what to do.

i was quoted $120 for new top o ring and flush, $180 for new top tank and flush and o ring

and flush was geting the core rodded = definitely removing the shit in there

no worries, just give them a call, probs best to tell them its an auto skyline is prob the easiest

also, that price was for me removing the rad myself and not including the coolant i'll need later

i went for a 40mm cooling pro one but i've got a manual

you could get an r31 one cheap and they are thicker and come in auto but have a different top mount but you could fab something

For interest I was quoted $190 if I dropped the radiator off, and they cleaned it out and new top tank.

I would have prefered an alloy one, but cheap alloy auto tanks are hard to find and this was covered by warranty anyway.

Interesting thanks Brendan. I'll try to get a hold of a whole radiator tomorrow as now with mine out the core looks stuffed.

On a side note... doesn't it suck how much coolant is lost when you open the cooling system (and you can't be bothered putting it on stands and collecting it with a bunch of clean containers the right size that you don't have, and re-using it... I never can bring myself to reuse coolant... looks so nasty)

the 31 rad could prob be made to fit but i'm not sure if the bottom has pegs, the dimensions of the core are fine and the hose exits are in the same place

maybe get a manual rad and an oil cooler and mount the cooler behind the rad = hot air onto it which will stabilise the temps a bit quicker

  • 3 months later...

I am having the same old over heating issues on my S1 stag as well. I am booked in for a radiator clean. I also want to replace the clutch fan. I had one on order at super cheap but they called today and said they cant get them in.

so, does anyone know where i can buy a new clutch fan assembly?? I have also tried burson's and auto pro on the coast.

Cheers

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...