Jump to content
SAU Community

Recommended Posts

well my series 1 stag started to have problems just as i was passing through warnnambool, started losing power at about 3000 revs. I made it to a campsite i had planned to stay at in peterborough, however now it wont start without banging under the fuel tank, and shortly dies thereafter. So im stuck here untill tuesday with my only hope being to tow to warnnambool to get it done. Does anyone know the part number for the fuel pump or what local cars share the same one? Also would my best hope be trying the nissan dealer in warnnambool, or any other suggestions? Anyone live around this area? Cheers

Link to comment
https://www.sau.com.au/forums/topic/301522-great-ocean-road/
Share on other sites

Look for a walboro drop in to suit R32 GTR. should be the easiest fit and they are said to be the same fuel tank. 180ish from bursons.

http://www.skylinesaustralia.com/forums/in...t&p=4249291 that post has the part number.

Almost any nissan pump or at least any skyline pump should get you home if you can get a second hand one cheap. If you can wait you can get one from here:

http://www.nzperformance.co.nz/store/walbr...mp/prod_80.html

which is a new intank Walbro with a nissan fitting kit for NZ$165 which should work out to about the same in aussie dollars with postage. Of course if you can get one where you are it will be worth paying a bit more just to keep you on the road.

Yeah pretty easy to change too, now that I've been through that... but good idea to a) disconnect the battery b) have very little fuel in the tank (like 1/4) c) have a big fire extinguisher onhand with someone ready to operate it and d) DISCONNECT THE BATTERY

...so yeah if you're comfortable kneeling in the back of your wagon with your arms up to your elbows in a fuel well then you can change it yourself. Pump size is 38mm diameter x 90mm length. That's a match with the standard pump's diameter and as near as makes no difference a match for the standard pump's length. The stock FPR should handle the increased flow rate just fine; at least well enough to drive back to a tuner carefully :wub: Most difficult part of fitting an aftermarket pump like the Walbro (which fits easy) in my opinion is changing the electrical connector to fit (although it MIGHT use the same one as stock - can anyone confirm this?)

i had the power wire come loose of my fuel pump (040) after going thro a rather large pot hole and i pulled it out,rewired it and re-assembled it on the side of the road, at 1am in the morning with a hyundai excels headlights on.wasnt very fun.then a week later the fuel pump fried itself.

its not a hard job,once you've done it

pretty sure my stock connectors were the right size for the 040 terminals

good luck matey

rubyrs4 if your in the warrnambool area that would be great! Still stuck here, bursons cant get a walbro for a week or two, trying nissan and other spare parts dealers now

No ... Adelaide.

If that doesn't work, it'd be quicker for me to post my pump to you surely :)

I have not replaced a fuel pump in the Stagea yet but I know from previous experience that if the Tank lid has a rubber O ring that its best to replace it when changing the pump, as the factory ones seem to blow out and get larger on contact with air. As I said this might NOT be the case for you , but might be an idea to look into it.

I have not replaced a fuel pump in the Stagea yet but I know from previous experience that if the Tank lid has a rubber O ring that its best to replace it when changing the pump, as the factory ones seem to blow out and get larger on contact with air. As I said this might NOT be the case for you , but might be an idea to look into it.

where do you get these from? can you get generic items?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...