Jump to content
SAU Community

Recommended Posts

Dunno mate, all I know is the oil's are not compatible. From reading level323's post's in the other thread linked above, it seems like its just an oil change but I really dont know.

I'd shoot him a PM and see if he replies

Well I spent a lot of time talking to a rep from HiChill yesterday which was fascinating. Basically Bozz is on the money about the deal. HiChill is simply a mix of iso-propane and butane (called hichill -30). You can buy it off the shelf from R&E parts in Glen Waverley - aristoc road. The mechanic next door is going to put it in my 94 gts-t which is currently running R134a, all that is involved is a flush (most importantly to remove lubricant which converts to acid in the presence of moisture) and new receiver/dryer which I have been advised is recommended for any re-gas anyway (if you like doing things properly). It is flammable but there appears to be a lot of misinformation about this and the relevance of the flammability of less than 300gs of butane, when you consider you have 50L of petrol or LPG anyway :D.

If you have an early model R32 which is installed with R12 then usually it's as simple as removing old gas and installing hichill. R12 doesn't use the nasty lubricant and hence a flush isn't required. I called around a few places and prices are generally around 60-80 for a straight re-gas and 200-300 for a flush and new dryer.

Thanks Bozz, the mechanic I spoke to wasn't happy about putting HC into a system designed for 134A is the compression issue the likely reason why? Or does 134a have exactly the same problem?

oo it can be used in R134a you say? Keep me up to date with this. I might change mine to HC if it can run fine in r134a.

Cheers

I can't see any reason why it couldn't.. basically as long as you follow the guidelines for the gas it will behave like any other refrigerant. He wont give me a warranty however lol.

  • 4 weeks later...

Grrr still no aircon.. apparently compressor is toast.. Now how does one get a good one? because everyone tells me if the compressor has been degassed even for a few hours the compressor will cop it. Find someone wrecking a car with a complete system still working?

Grrr still no aircon.. apparently compressor is toast.. Now how does one get a good one? because everyone tells me if the compressor has been degassed even for a few hours the compressor will cop it. Find someone wrecking a car with a complete system still working?

Thats odd?

I supplied a second hand one to be fitted by AC mechanic. It was posted from NSW to Vic and took a couple of weeks before it was installed. Working perfectly fine. (although it is making a racket now when idling due to the high pressure. This was after 1yr of installation)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...