Jump to content
SAU Community

Recommended Posts

Hey everyone!

Texi is on Jan 31st, and like always we need helpers on the day to do things like timing, end gates, "3 2 1 GO!", marshalling etc - basically all the things you saw myself and the legends who helped out last time doing

None of the jobs are hard at all, its an easy way to get up close to the action.

A couple of people have already offered to help out, who did so without knowing there would be payment; What legends! (and yes, they'll be paid now)

I do need helpers onsite from 830am until event ends which should be 445pm. There will be a lunch break around 1230pm while the courses are changed to the afternoon courses

Lunch and drinks will be provided free throughout the day.

Yes you can choose what job to do, here's each one;

- "3 2 1, GO!"

Counting down the time so drivers know when to start their runs. Very simple, just need a loud voice and 3 fingers to hold up

- "Timer"

Timing each run and writing down the end time on a form provided. Also if someone goes a wrong direction or hits a cone, taking note of that.

- "Marshall"

Ensuring the flow of cars onto and off the track stays smooth. Its basically a traffic controller job, making sure the entry to the skidpan (single lane) doesnt have a traffic jam and that the next car is ready to have their run. Common sense really!

- "End gate"

An official who mans the end gate of a course, reports if an entrant hit a cone, and once the entrant has come to a complete stop will move a single cone out of the way for the entrant to move to next course

I need;

2xtimers

1xmarshall

1xend gate

1x3 2 1 GO

So far the following have offered (sorry if someone offered and i missed it);

MsNismo (Timing)

Xmetal

BezerkR32

So we need a few more - who can help out and earn some coin for the day? :(

Link to comment
https://www.sau.com.au/forums/topic/303402-help-needed-50-per-person/
Share on other sites

If my car breaks on Thursday I'll scream 3 - 2 - 1 - Go, or traffic control and even if it doesn't break, gimme a job as I said to you a few weeks ago in PM.

Uncy Duncs and all the others managed to get runs in last time, so I'm pretty sure I can manage to if you gimme a job,

i was going to bring my camera up hoping that you might be able to learn me some stuff.....

I'm always up for it Steve. I can hand my camera to someone else for a while if you need another set of hands. :banana:

hmm seems there's enough people willing to volunteer

I'm not fussed either way, just if needed I'm happy to free up a spot for someone who wants in if it gets full & then be a marshall

If not I'll just have to show these skirts how to texi :P

hey ill be more then happy to do anything on the day for the club, not sure as to how much help i would be but if i can run a store im sure i can time or countdown or do little jobs for you guys! as long as i get to see some skylines!

i was going to bring my camera up hoping that you might be able to learn me some stuff.....

For sure! I don't mind doing tutoring on the day. :huh:

Eric! I'm wanting to have a go at motion picture too so yeah i'll do some footage time as well. ;)

I would have thought more peeps would take up Steve-o's offer of 50 buck each,,,hell I'm thinking about it and with back pay I'll be owed about $2000.

Are you paying us cash mate or are you using your cheque book?.

Everybody Steve-o's not really going to pay you 50 smackers,,,he's just a funny bastard.

Neil.

Well, Pay or not I'm still in for 1/2 day. With all of the work that goes into an event such as this we really do need our members to step up and help out from time to time on the event.

I think Xmetal has the same outlook but check with him then assign me a job.

See ya there - oh, I've got a new tiny camera that is the size of a key fob - great for really low on-board or in cabin shot back at the driver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...