Jump to content
SAU Community

Recommended Posts

chasing a turbo for my 25...

looking for good response and around the 250ish mark.

have searched and read up... for 2 days and looking into HighFlowed 33 turbo, Garrett 2860Rs-10, or 2871.

curious on other people opinions but am really trying to keep full boost below 3200.. from what i have read the 30 series are a lil too laggy for my liking.. bear in mind i am chasing response and not huge power.

car will be running power fc, z32AFM, bosch 040 pump, straight 3inch pipes, 2way 4.1 ratio.

whats around??

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/
Share on other sites

there is no link, im saying your lieing and have not read :) *read have not read enough*

READEDREADDEREDAED

the dyno results thread had everything you want to know, there is also the GT30 thread which will cover alot of the information you want about things that are smaller and cheaper (especially later) the 2871 Rb25 thread is also good as is the hypergear hiflow service thread.

start reading you could cover it all in a couple of hours, and I guarantee you will find people with results equal to what your asking, 250kw and 3200rpm spool

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5042908
Share on other sites

garrett 3071R? i'm looking for similar power but without having to run the turbo at 18 odd PSI, which kind of limits it to a 3076R with a .63 rear. No offence to Hypergear but I don't really want to set myself up for disappointment with a cheap turbo again

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5042947
Share on other sites

link didnt work scott.

GTRS is $4500 new....

Garrett turbos are under $2000 new so mildly different in price.

been looking at GCG vs Hypergear turbos... opinions?

they aren't $4500 new. $2800 from nengun.....which is expensive compared to a quality hi-flow but certainly isn't $4500.

Link to comment
https://www.sau.com.au/forums/topic/304539-turbo-opinions/#findComment-5043172
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...