Jump to content
SAU Community

Recommended Posts

Currently have a surge setup with a Carter Gold lifter - 2.5lt surge and 2 x 044 Bosch fuel pumps and Turbosmart rising rate reg.

Full braided lines and speedflow fittings, 4 Indy blue 1600cc injectors. Motec M400 running gear.

Just looking for peoples experiences in running methanol using these pumps, whether its a 50% mix or a 90% mix and information would help.

This system has handled E85 (15% 98RON) ELF branded ethanol but looking for a different option as right now as meth is alot easier to aquire in my area, that and the fact that ANDRA have banned E85.

Have been told to upgrade to a magnafuel pump but not sure which one, reccomendations?

Thanks,

Gary

Edited by Parag0n
Link to comment
https://www.sau.com.au/forums/topic/304798-044s-methanol-tolerant/
Share on other sites

Just double check that your braided lines are ok with methanol.

and depending on your power level you may need another pump, most methanol big power drag cars run a big mechanical pump becuase the electric pumps cant flow enough unless they have half a dozen pumps in the boot.

If you are running methonal and have a check valve after the pump I believe you have to make sure it is meth compiant too. I got a Speedflow check valve and was instructed to change an O-ring in the check if running meth, it is supplied when you buy one.

Fair enough, anybody had any experiences?

I'm talking about straight meth yes, not a water/meth injection etc

Have a look at what all the Pro Turbo cars start and idle on. They have an 044 in line for this purpose.

  • 1 year later...

Just doing some thread mining about methanol, I will be getting a E85 tune done on my new engine and was thinking about what extra gains I would get running on methanol.

Im running 2x 044 pumps so I guess that would be the limiting factor when using methanol as they wont flow enough...?

Just doing some thread mining about methanol, I will be getting a E85 tune done on my new engine and was thinking about what extra gains I would get running on methanol.

Im running 2x 044 pumps so I guess that would be the limiting factor when using methanol as they wont flow enough...?

quadruple your fuel system for meth from 98.

your gonna need 2400cc injectors for 850hp, base on your 475rwkw figure i reckon 550-600+ on meth

so 850hp @ 88% duty with BSFC of 1.4 works out around 2360cc

I have 2000cc injectors now so would need a few more pumps then.

Just thought meth would be a cheap option over drum E85 and C16 type fuel

Also, will the 044 pumps handle methanol..?

Edited by WHITER33GTS-T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...