Jump to content
SAU Community

Recommended Posts

i thought i better let everyone here know as i have posted in the mackay thread.

i am going to start getting prices for accomadation in airlie beach for the easter cruise, just after numbers so i can get a more accurate figure.

so far the plan is to go mackay on good friday and race at palmyra drags if its open, then head to airlie on satday check into hotel, go for a drive get pics then let shenanigans begin.

2011 thread http://www.skylinesaustralia.com/forums/topic/353599-sau-2011-easter-weekend-in-airlie-beach/page__hl__sau+easter+__st__60

where i am looking at for accomadation http://www.marinashores-whitsundays.com/at_Marina_Shores_Home.html

prices off their site http://www.marinashores-whitsundays.com/check_availability_hotel6.asp?Region=360&Town=Airlie+Beach&hid=9178&numAdults=1&numChildren=0&numRooms=1&roomType=0&lid=1&toPage=all&item=3&tranHost=&tranURL=&selDayStart=7&selMonthStart=4&selYearStart=2012&selDayEnd=9&selMonthEnd=4&selYearEnd=2012

i hope we can get a decent discount for a large group but really $200-$300 for 2 nights is pretty goo in my books. i think it cost me & phil $160ea for the night.

if i get enough interest i will start a dedicated thread.

  • Replies 1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just in case some of you havn't heard.

Autobarn is having it's grand relaunch opening tomorrow with 20% off store wide and a catalogue with some absolute bargains on special.

There is also a sausage sizzle, car show, promo girls (as if not come for that alone) and prizes up for grabs.

A lot of the audio reps from all the major brands will also be in store so if you want to talk to the guys with the best knowledge on their own gear now is a great opportunity to talk to the best in the know how.

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...