Jump to content
SAU Community

Recommended Posts

Before today I wasnt a big fan of commodores, but after today, I will never bag another vt to current commodore.

My friend owns and drives a VX series 2 executive. Travelling down a large hill today up at nambour. Pissing down rain, and water all over the road.

My friend was driving, and all of a sudden I feel the rear end step out. we werent speeding, in fact doing about 75 maybe 80 in a 80 zone. we hit a massive river of water flowing down the hill and the left rear stepped out. Being at the top of the hill, and with about a 45-50 degree incline, we starting sliding down the hill sideways. then it rolled onto the passenger side, then onto the roof.

We were travelling at about 70km/ph down the hill on the roof of this commodore. for appox 15-20 metres when we hit a guard rail for a massive embankment that was flooding with water. we hit it so fast on the drivers side, that it acted like a pivot and flipped the car again, righting itself in a flooded culvit, with trees and shit everywhere. both crawled out about 3 metres up this embankment, and called the police, etc. Police were really good, said the driver didnt breach the road rules and was just an 'accident'

Both Taken to hospital, nothing major wrong, just bump on head, few cuts, sore neck, back, arms and dizzy. (I think I will feel it tomorrow)

Being a car buff, I was interested to see what damage and stuff had happened, (before being taken to hospital, that is)

The engine shut off, whilst we were upside down. no fuel leaks or ruptures, even though rear suspension had collapsed.

The engine was shunted back and down, thus ensuring it did not protrude into the cabin. (engine would have been ****ed)

All windows were 'flung out' during the accident and had 'rolled up' with the tinting. The only cuts I got were on my feet from collecting all my shit over the road. Because we were upside down, everything was on the roof. (excatly like the movie hot shots when he does a barrel roll and all his shit falls on the roof. because the rear window shot out whilst upside down, all our crap was spread all over the road, like cd's etc)

Air bags did not deploy, (thank god), insufficient damage to front and/or rear for them to deploy (i think)

The side panels absorbed most of the impact with the trees and guard rail, with them collapsing in critical places. not one panel was ok, it looked as though they all took the impact together.

dash, steering wheel and seats did not move one inch during the impact. seat belts did pretty good to stop us from moving around too much.

The roof was by far the most interesting thing, the pillars showed no sign of bending or collapse, but had crimpled in certain places in the middle of the roof, between the passenger and driver. Thus ensuring the head space above the driver and passenger was not compromised. (we collected a reflecter in the middle of the road which was embeded into the roof above me !! when we finished.)

In summary, I have always bagged commodores for being crap, etc, but after going through something like that and looking at what crash technology has been installed in modern cars, I have to admit if i was in a smaller car, I doubt we would have walked away. It was quite amazing for a car to stand up to travelling upside down at 70km/h, flip, and land in a gully and the passenger and driver to walk away. And you dont really take any notice of what crash tech is in your car until you have a crash, and walk around it, going "ah that bit collapsed allowing this bit to etc"

As soon as I get the ok from the doc, that I can drive again. He told me to rest as I will be very sore soon. I will post pics as soon as I can get photos of the car. and look more into the certain elements that saved my life today. I cant really go anywhere so I thought I would share this story with you.

Link to comment
https://www.sau.com.au/forums/topic/30657-commodores-are-good/
Share on other sites

Cool story Matt, Glad you and your friend are ok and glad you weren't in the R33R. Nice avatar...... now I need to change mine!! You deserve it more, having a genuine impul, mine is a genuine kit but not a real R33R. And Holdens have always been good to crash!!

very lucky there! I'd be entering lotto or something! There is some good things in modern cars afterall, and safety gets better every model - no matter what the car. One of the reasons i am not a fan of small cars, no matter what the safety features they might have, they never feel as "safe" as a larger car.

Without meaning to be rude, im glad you came out of your accident ok.

As safe as Holdens may be structurly, my mum drives holdens flagship car the caprice, and as "adavanced" as its sposed to be the airbags did not deploy, when she rear ended an almost stationary car at 80kph the other car almost not moving (doing approx 5kph). Caused 10g's worth of damage to her car alone and the airbags still didnt deploy, she broke the windshield in 2 spots, one with her wrist and one with head and yes she was wearing a seatbelt, the pyroneumatic (sp*) seatbelt pretensioners didnt work either. It was a dead front on collision.

How safe are holdens??

My mum and dad are currently seeking legal advice about what to do as mum was off work for a while in an accident where the airbags should have deployed and saved her from many of the injuries she recieved.

Just my 2 cents...

I dont think holden is good just from ur experience, sorry to hear about it by the way. The way i see it is the car does its job in the safety department, doesnt make it a special vehicle tho, its still JUST a holden. And i think if u were in an excel u would be ok as well, as it has panels that crunch easy to save u!

The issue is not panels that crunch "easy to save u". If the roof collapsed easily then it would have been extremely dangerous, hard to get out of the car, and could have caused serious injuries to the occupants. An Excel does not have anywhere near as much sheetmetal as a commodore to absorb and resist impacts, and is a lightweight old korean (or something) design. It may have some panels that crunch easy, but anyone can put some panels that collapse on a car, thats easy, and doesn't necessarily mean the car will be safe in a crash. Making a car safe in a crash is a complex and expensive excercise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...