Jump to content
SAU Community

Recommended Posts

What do you guys reckon of Link computers for R32s?

I know quite a few New Zealand guys use them and seem to like them.

Which would be better between a Link computer and a remap for an R32 RB20DET with FMIC, full exhaust, T04E, external gate, bigger injectors etc etc

Cheers

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/
Share on other sites

Hi JiMiH, my choice would be to remap in real time the standard R32GTST ECU, if you have finished your mods. If you still have things to upgrade, then a Power FC would be a better choice as the extra cost would be covered by the saved chip burning.

Hope that helps

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-622820
Share on other sites

i went to get info on the new wolf 3D for my rb20det and the bloke said that there was nothing better than the link ECU for a rb20det and then he told me it would be $2300 fitted and tuned so i tuned out, am now looking to remap the factory ecu to get my end results for a thrid the cost!

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-623975
Share on other sites

How does the Wolf compare to remapping the stock ECU then?

I mean apart from the "wanky" features that you can get such as rotational idle, are there benefits of a Wolf3D above a remapped ECU?

I haven't finished my mods yet, but I think once you have a remapped ECU you only pay for dyno time later to retune it?

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-626337
Share on other sites

James,

I took the remap route and all is sweet at the moment. The place that did my tuning, as you know, are able to do pretty much anything with the ecu, except for the features as you mentioned. They can also do a few other really cool things with the ecu as well. Bit hard to explain on here but they can put on "Valet" mode etc. Stops dickheads thrashing your car basically.

A whole lot cheaper than a Link I'd imagine.

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-627774
Share on other sites

I know enough about the Link not to suggest anyone uses them:p

JiMiH, The wolf will provide so many more features over the remap, without getting into the wanky stuff like anit-lag rotational idle etc. Pop down to see Steve at SST he'll be more than happy to run through some of the feature and demo the software to you:D

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-627808
Share on other sites

Yeah I spoke to Steve at the drags the other night and told him I'd pop in one Saturday morning to check it out.

Dan, I'll have to have a chat with you soon mate and you can tell me bout your remap :( Not to mention take me for a drive :(

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-627817
Share on other sites

Traction control is wanky stuff:p The traction control works via hall-effect sensors, and sends a signal to the engine to drop the power, rather than a second butterfly infront of the plenum like the factory fitment traction controls use. Not much good on turbo engines as it lets the turbo fall off boost.

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-629393
Share on other sites

save a dozen maps on your pc

give the bagging a rest, RIPS times are a recommendation for the stuff and ive seen 100's of cars run link with awesome results and no problems. objective debate might be better to base a decision on but is sometimes a little difficult for some

pm me jimih i can help you out with heaps of cars running it but a remap would be cheaper and just as effective as an aftermarket ecu

Link to comment
https://www.sau.com.au/forums/topic/30683-r32-link-or-remap/#findComment-630526
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...