Jump to content
SAU Community

Recommended Posts

I assume its atmospheric? Probably going to see a lot of stalling while driving then... Should get it tuned to counter that, but I dunno if you can do that with a stock ecu.

Also depends on what type of BOV it is i think, some of them have adjustable vents so you can control the pressure being released, etc.

Hi, yup I'm staying plump back but like I was saying stock ecu but with cat back if I change to after market BOV any adjustment to be made on the BOV itself? And how to do it?

Cheers

Daniel

Well plumb backs are fine then, but that begs the question: Why get an aftermarket one at all?

Unless you have such a big intake that the air flow is more than the stock BOV can handle (considering you have a stock ECU, that seems unlikely), the stock one will be more than good enough. Its just a valve, there is no performance gain from them at all. You would be far better off spending the money elsewhere, or saving up for something much more useful :D

Well plumb backs are fine then, but that begs the question: Why get an aftermarket one at all?

I had the stock bovs push open when boost is over 10 psi , get hammer out n smash end in to get a bit more tension on spring :D run my 31 at plex with return off plumb back n car 3mph slower n laggier between gears :(

Oh forgot to add that I have a plump back FMIC installed as well. So...... Cos very new to this Turboed car thing. Last car was a civic B16 twin cam convert. So any advice would be good.

Leave the standard BOV that's on their at the moment if its not causing you any problems..

No point in getting an aftermarket one as most people buy them for the different noises they make. Plumb back makes hardly any noise, so defeats that purpose.

Dont see how it makes a difference.

For all of you making a big comment about how its not an issue, he has mentioned he's had troubles with it holding boost.

That being said I don't know much about what aftermarket BOV's are better than others, I suggest you call someone from the consolidated workshop thread, or a known parts store in perth i.e. kyp/jpc etc to see what they think will be best for you.

Dont see how it makes a difference.

For all of you making a big comment about how its not an issue, he has mentioned he's had troubles with it holding boost.

That being said I don't know much about what aftermarket BOV's are better than others, I suggest you call someone from the consolidated workshop thread, or a known parts store in perth i.e. kyp/jpc etc to see what they think will be best for you.

I don't see where he mentions that..

Agreed on calling / getting perth store on recommendation for aftermarket bov + installing it.

Dont see how it makes a difference.

For all of you making a big comment about how its not an issue, he has mentioned he's had troubles with it holding boost.

Lol that was Brenden that said that, not the OP

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...