Jump to content
SAU Community

Recommended Posts

ok so this morning I stuiply, b4 i was ment to drive to work i decied to put my new turbo timer in as my old 1 would no longer power up. easy enough job i thought just plug the new unit into the old wiring. all well and good till i go to turn he over and i get nothing but "click click click" from the starter. fair enough. wait a second then same again. i now have no radio, dash lights or engine turn over noise. i checked the engine bay fuse box all where ok. but im thinking maybe some other fuses some where or maybe dead flat battery??? any ideas guys. im away for work tonight (had to be picked up!) so now im stewing on WTF ive done to my car and its killing me...

thanks.

Link to comment
https://www.sau.com.au/forums/topic/307355-car-will-no-longer-start-help/
Share on other sites

OK well I think the most obvious question is right now...is it the same turbo timer? Same brand even? If not how do you know the existing harness is compatible with the new one that you bought? And from your statement I'm assuming your ACC electrics turned on the first time but not the second?

EDIT: Beza has a fairly good point, when was the last time you drove the car?

OK well I think the most obvious question is right now...is it the same turbo timer? Same brand even? If not how do you know the existing harness is compatible with the new one that you bought? And from your statement I'm assuming your ACC electrics turned on the first time but not the second?

EDIT: Beza has a fairly good point, when was the last time you drove the car?

differnt turbo timer though the same 3 pin connection. i drive the car daily. it had a flat battery the day before cause i left the lights on. started the car with a portable jump starter. everything worked fine drove the car all day yesterday. turned off and started afew times. i honestly cant remember about the dash lights but car head lights and alarm still worked so battery carnt be dead flat like the day before. are the 34 fuses boxes in the boot like the 33 or under the dash? might be a combo of flat batterry/ blow acceseries 10a fuse maybe?

yeh i did think of that but didnt have time to meter it... its just wierd that the dash lights and radio didnt come on. i wouldnt think they used much power. the car alarm still worked when i left it this morn.

The car should start whether the turbo timer is plugged in or not, it basically works by keeping the ignition wires and accessory wires hot even after you've removed the key from the ignition. Therefore I cannot see how changing over (or removing entirely) the turbo timer module, would prevent the car starting.

The possibility is that the harness pin outs is different for the two modules, or that something has shorted and blown a fuse (under the dash) or fusible link (under the bonnet). Check your voltage with a multimeter to see if you have a flat battery. It would not otherwise make sense that if you backtracked to before you changed the module over, that the car still wouldn't start.

agree, with a flat battery the lights all either come on and work, or are a bit dim but still work

its only when you goto crank that it dies in the bum and the lights go dim etc

and with a flat battery it wont tick tick tick cos it will still try asnd crank and go raaaaaaahhhhhhhhhhuuuuuuu and all the lights will go dim

ie the starter motor will still try and fire and turn the crank

it wont just go click click click

Take the TT out and toss it - you really don't need it, it's pure wank-factor.

Just because the car ran fine after a jump-start from flat doesn't mean it has fully recovered from its ordeal. It might take several days use of the car before the battery fully recovers and is able to start the engine in the morning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
×
×
  • Create New...