Jump to content
SAU Community

Recommended Posts

Replacement for thread "To do list 2003" Thanks to benm.

I needed a place to post the 2004 plans

So everyone can list what they are doing to their cars this year.

What is everyone planning on doing to their cars in 2004?

Here's mine - trying to do labour myself

Certain will do

CAI box install ($195) - to comply with the Dec 2003 law change

whiteline handling kit ($600)

wheel alignment ($65)

rego and insurance

clean and oil steering wheel ($24)

clean inside car using cloth and trim cleaner ($26)

cable tie the computers to stop them rattling around when hard cornering.

install hand controller with two mounting points - in view and hidden away.

buy a laptop dongle to see the computer readouts ($150)

fix automatic computer/electrics and replace speed sensor screw in back of speedo cause its mucking up the torque converter and won't stay in power mode and switch for overdrive doesn't work.

front wheels DBA brake slotted rotors installed ($400)

new front pads hawk HT-10 ($550)

greddy profec B-spec boost controller ($527)

greddy oil catch can ($174)

oh yeah - talk to nam's and get sat nav and tv system fixed for Australia.

not certain yet

auto to manual conversion (not sure how much but want to do the diff conversion with the gearbox and clutch)

garrett GT3040 turbo ($1910)

custom exhaust manifold with external wastegate ($1500)

installed with turbo and dump pipe ($300)

stainless braided oil lines for turbo ($400)

fuel pump and rising rate regulator ($600)

720cc Trust injectors ($1300)

tomei cams ($1200)

probably need new tyres. Pirelli PZero Neros ($1460)

250 or 350rwkw this year if I'm still in Australia

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/
Share on other sites

- learn more about my car

- resist the temptation to race on the road

- not let my brother crash it

- decide which mod choices to make

mod option a (cheap)

- r34 GTT intercooler

- SAFCII

- 3" Exhaust

- partition for pod

- audio install

mod option b (not as cheap)

- FMIC

- 3" exhaust

- PowerFC

- audio install

- more that I can't think of now, too tired..

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-622228
Share on other sites

Replacement for thread   "To do list 2003"   Thanks to benm.

Np, I lost that thread and couldn't find it for awhile, by then i'd missed too many months and just disregarded it.

My 2004 List:

* Get a set of track rims with semi-slicks or full slicks.

* Fix front bar for better FMIC airflow.

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-622983
Share on other sites

2003 was a quiet one, but in 2004:

- Sell my car to a doting R32 fan :P

- In April/May leave for trip to Austria, Germany, Denmark, France, Spain... then set up HQ in England.

- Coincide travels so that i can catch 1-3 F1 GPs'

- Get job in oil,gas or pharmaceutical industry in the UK/Ireland

- 2004/2005 - Buy myslef one of these for bringing back to Aus in 2-3 years time (if the coin starts to flow perhaps even a TVR

rs-cosworth-rs500-03.jpg

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-629119
Share on other sites

just a quick question for roy so i dont go off topic or hijack this :P

what model TVR would you be interested in? you'd really have to get the coins flowing to get the Tuscan (i think its a tuscan... maybe 440) in you avatar :)

Ps. My to do 2004 -

Start looking into prices and power:weight (damn vic :) ) of skylines for when i get my Ps in 2005.

Work with my father on a 68 fastback mustang :burnout:

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-629234
Share on other sites

To do list 2004:

- Whiteline Works Kit ($2200) SOON!

- Fix vibration when braking (disc warp?)

- Fix misfiring(?) problem at 5000+ rpm

- Fit frontbar + sideskirts, fix hail damage on roof + full respray

- Fix Audio System

Maybe:

- GT2835s Pro bolt-on kit + FMIC

- PowerFC

- Upgrade Fuel pump

- Fit 17" rims

- Motorsport Racing Course

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-629496
Share on other sites

what model TVR would you be interested in? you'd really have to get the coins flowing to get the Tuscan (i think its a tuscan... maybe 440) in you avatar

Id be hoping to chase down a Cerbera, last year when i was over there you could get one for $17,000 pound. (approx 97 model) So hoping i can get a late model, say 2000 for about $20,000 pound.

That said Escort Cosworths (i dont like 4wds so would want to be a good buy) go for $10-14000 pound modified but so do '92 911 Porsches, and Sierra's vary a bit due to age and mods.

All depends on the job and the amount of travelling i do :D , might end up with a Vauxhall Nova :D

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-629589
Share on other sites

- Find a woman to sit in the passenger seat, and occasionally join me in the back seat :bahaha:

Er...

- Do some drift days and get some proper sideways action happening

- Finish maintenence list on the R31

- Graduate uni

- Earn wads of cash

- Decide on my car future (eg buy R32 and keep R31 for a track car or sell it or whatever)

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-629930
Share on other sites

2004:

Car:

* New B&P Coola

* Greddy/Trust Plenum

* Oil Coola

* Tune suspension

* Do somethng with Brakes - maybe DBA 4000 kit, braided lines.

* Respray & open up front bar for I/C

* Look for new wheels - 18"s

* Semi Slicks

* Set of 16" drag wheels for rear

* Set of drift wheels for rear

Events:

* More Track days

* A couple of off street drags

* Drift days

Link to comment
https://www.sau.com.au/forums/topic/30764-to-do-2004/#findComment-630580
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...