Jump to content
SAU Community

Restoring A 32gtr Back To Original Factory Spec

RSVFOURUK
 Share

Recommended Posts

Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Due to me forgetting my password and changing my email address I have had to re register under grean machine and rather than start this thread again i will update it using my current name. Hope that’s in order.

So an update with apologies for the poor quality pics but they were taken on my phone

The new suspension is on

.

IMG_0727.jpg

The exhaust is fitted and sounds remarkably sporty

A few more parts have been sourced ..........

A mint dashboard with good vents out no bubbles

073.jpg

dash removed (not as hard as I expected)

086.jpg

and new one in

IMG_1237-1.jpg

Original wheels and brakes are now on. Only issue was the rear calipers had been p[ainted silver . Luckily this had been done badly so all the paint came off easily with nitromors and just left the original satin black finish.

Also a had a major find and probably my favourite one.........an original japanese 32 GTR sales brochure in mint condition

IMG_1246-1.jpg

IMG_1244.jpg

I have also found a set of original mats in as near to perfect condition as I could hope for.

Nearly all the silly little bits have been sorted - pedal rubbers and a few internal clips and trims

I did find an original radio but it has the plastic covers missing so am on the hunt for a better one

Also need to find the right fasteners for the wind deflectors - they are on and fit but are not fixed well enough to drive the car yet. I may be better off going to Nissan that is if they still do them ?

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Nee-san Grand Master

Nee-san

Posted
Posted

Due to me forgetting my password and changing my email address I have had to re register under grean machine and rather than start this thread again i will update it using my current name. Hope that’s in order.

So an update with apologies for the poor quality pics but they were taken on my phone

The new suspension is on

.

IMG_0727.jpg

The exhaust is fitted and sounds remarkably sporty

A few more parts have been sourced ..........

A mint dashboard with good vents out no bubbles

073.jpg

dash removed (not as hard as I expected)

086.jpg

and new one in

IMG_1237-1.jpg

Original wheels and brakes are now on. Only issue was the rear calipers had been p[ainted silver . Luckily this had been done badly so all the paint came off easily with nitromors and just left the original satin black finish.

Also a had a major find and probably my favourite one.........an original japanese 32 GTR sales brochure in mint condition

IMG_1246-1.jpg

IMG_1244.jpg

I have also found a set of original mats in as near to perfect condition as I could hope for.

Nearly all the silly little bits have been sorted - pedal rubbers and a few internal clips and trims

I did find an original radio but it has the plastic covers missing so am on the hunt for a better one

Also need to find the right fasteners for the wind deflectors - they are on and fit but are not fixed well enough to drive the car yet. I may be better off going to Nissan that is if they still do them ?

pretty sure you can buy the head unit fascia from nissan quite cheap mate.

  • 3 months later...
  • 1 month later...
Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Well after a very lomg time the car is finished :yes:

A few pictures

gtr1.jpg

gtr4.jpg

gtr3.jpg

gtr2.jpg

the refurbed splitter - all my own work was previously really badly scatched

gtr7.jpg

gtr10.jpg

gtr6.jpg

gtr5.jpg

The colour is weird unlike mosts pearlescents it doesnt flip along one side - the whole car seems to look different colours in different lights ...Today was a blue day

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted

I don't think the colour is factory colour? Correct me if I'm wrong. And I'd ditch that red strut brace too. It all be interesting to know how a 100% stock r32 gtr feels like with boost restrictor and ceramic T28s. Good work though! :)

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)

Did you even read the thread?

Sure did. Just saying I though the colour wasn't factory. But I just researched it and there is a factory option in this colour. Just a little weird seeing the engine bay is in a completely different colour haha.

Edited by G0Z1LLAAAAA34
Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Did you even read the thread?

Thanks - saved me saying it.

So to confirm the idea was to restore it to factory spec - thats why the strut brace is red

No 32GTRs were painted with the same paint finish under the bonnet a lot had a different colour under the bonnett and the ones that were the "same" were a matt finish so looked out of place just as much.

All mentioned in the thread ...............

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)
Thanks - saved me saying it. So to confirm the idea was to restore it to factory spec - thats why the strut brace is red No 32GTRs were painted with the same paint finish under the bonnet a lot had a different colour under the bonnett and the ones that were the "same" were a matt finish so looked out of place just as much. All mentioned in the thread ...............

Oh really? I really didn't know that after having 3 R32 GTRs myself.. It is fair if the engine bay colour is close to the panel colour however OP's r32 has a completely different colour in the engine bay. Almost looks like it was a silver car to start with but resprayed the exterior to that blue if you get me... Here is a photo of my red metallic r32 gtr engine bay...

266350_10151075166106121_1318281766_o.jpg

Edited by G0Z1LLAAAAA34
iwanta34gtr Grand Master

iwanta34gtr

Posted
Posted (edited)

Great thread.

I took a similar approach with my current R34 GTR.

Instead of making her faster I have also been focused more so on making her as close to perfect and original as possible.

Love your work.

Edited by iwanta34gtr
G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)

do you thread crap and post pics of your car in peoples project threads for any particular reason ?

I'm not trying to be a dick or anything, But I don't understand why you get offended by anything that is a little negative. I was there to just express my opinion based on my knowledge in GTRs since this is called a forum? However no 1 is always right so that includes me too so hey prove me wrong if that's the case and I will appreciate it.

In regards to the photo of my car, I just thought I'd post something relative to back up my opinion on engine bay colours. And thanks to the guy for picking on that piece of wood on the battery as I never said my car was "factory spec"... We all love cars and I think it is good to hear both positive and negative comments.

Edited by G0Z1LLAAAAA34
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Did tie rods. Steering now not "springing" back.

      By soviet_merlin · Posted

      I think the consensus was that's normal. Sloped road surfaces or something? I remember @silviaz went through this before. It might be one of those things you never notice until you pay attention to it.
    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • GTSBoy
      R33 general questions

      By GTSBoy · Posted

      What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • AdiR34
      Did tie rods. Steering now not "springing" back.

      By AdiR34 · Posted

      Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
×
×
  • Create New...